GW5BNC15L02 Sharp Microelectronics, GW5BNC15L02 Datasheet - Page 10

• Manufacturer Part Number: GW5BNC15L02
• Description: LED MOD 3.5WATT ZENIGATA 5000K
• Manufacturer: Sharp Microelectronics
• Type: Without Connectorr

Specifications of GW5BNC15L02

• Color: White
• Luminous Flux @ Current - Test: 190 lm
• Current - Test: 360mA
• Current - Max: 360mA
• Driver Circuitry: No
• Voltage: 10.2V
• Wavelength: 5000K
• Configuration: Single
• With Connector: No
• Voltage - Input: 10.2V
• Power - Input: 3.5W
• Illumination Color: White
• Wavelength/color Temperature: 5000 K
• Luminous Flux: 190 lm
• Power Rating: 4.4 W
• Operating Voltage: 10.2 V
• Operating Current: 400 mA
• Minimum Operating Temperature: - 30 C
• Maximum Operating Temperature: + 90 C
• Lens Shape: Rectangular
• Number Of Leds: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 425-2733; GW5BNC15L00

■ Important Notices
· The circuit application examples in this publication are
provided to explain representative applications of
SHARP devices and are not intended to guarantee any
circuit design or license any intellectual property rights.
SHARP takes no responsibility for any problems
related to any intellectual property right of a third party
resulting from the use of SHARP’s devices.
· Contact SHARP in order to obtain the latest device
specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the
specifications, characteristics, data materials, struc-
ture, and other contents described herein at any time
without notice in order to improve design or reliability.
Manufacturing locations are also subject to change
without notice.
· Observe the following points when using any devices
in this publication. SHARP takes no responsibility for
damage caused by improper use of the devices which
does not meet the conditions and absolute maximum
ratings to be used specified in the relevant specification
sheet nor meet the following conditions:
(i) The devices in this publication are designed for use
in general electronic equipment designs such as:
(ii) Measures such as fail-safe function and redundant
design should be taken to ensure reliability and safety
when SHARP devices are used for or in connection
with equipment that requires higher reliabilty such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment (terminal)
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
10
(iii) SHARP devices shall not be used for or in connec-
tion with equipment that requires an extremely high
level of reliability and safety such as:
· If the SHARP devices listed in this publication fall
within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Law of Japan, it
is necessary to obtain approval to export such SHARP
devices.
· This publication is the proprietary product of SHARP
and is copyrighted, with all rights reserved. Under the
copyright laws, no part of this publication may be repro-
duced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, in whole or
in part, without the express written permission of
SHARP. Express written permission is also required
before any use of this publication may be made by a
third party.
· Contact and consult with a SHARP representative if
there are any questions about the contents of this pub-
lication.
--- Transportation control and safety equipment
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
--- Space applications
--- Telecommunication equipment (trunk lines)
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g.
(i.e., aircraft, trains, automobiles, etc.)
scuba)
GW5xxC15Lx2
Sheet No.: DG-xxxxx