BXRA-W0260-00000 Bridgelux, BXRA-W0260-00000 Datasheet - Page 24

• Manufacturer Part Number: BXRA-W0260-00000
• Description: LED ARRAY WARM WHITE 295LM
• Manufacturer: Bridgelux
• Series: LSr
• Type: Without Connectorr

Specifications of BXRA-W0260-00000

• Color: White, Warm
• Luminous Flux @ Current - Test: 295 lm
• Current - Test: 350mA
• Current - Max: 600mA
• Driver Circuitry: No
• Voltage: 12.6V
• Wavelength: 3000K
• Configuration: Rectangle
• With Connector: No
• Voltage - Input: 12.6V
• Led Color: Warm White
• Luminous Flux @ Test: 295lm
• Cct: 3700K
• Forward Current @ Test: 350mA
• Forward Current If Max: 600mA
• Forward Voltage @ Test: 12.6V
• Viewing Angle: 120°
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Power - Input: -
• Other names: 976-1010

Mechanical Assembly and Handling
Recommended assembly is illustrated below.
When handling parts, please avoid contacting and do not apply stress to the resin area (see Figure 1,
resin area is indicated in yellow).
Product should be firmly secured onto appropriate heat sink by fastening M2.5 or #4 screws on both sides
of the product as illustrated in Figure 21. The recommended center-to-center spacing for these the two
tapped holes for mounting screws is 17.87 ± 0.10mm. Bridgelux recommends the use of hard non-
electrically conductive flat washers with lock washers. Refer to Application Note AN11 – Handling and
Assembly of Bridgelux LED Arrays, for more details.
A thin layer of thermal grease should be applied to the bottom surface of the LED Array, between the
bottom of the array and the heat sink. All air gaps and voids between the heat sink and array should be
eliminated. Ensure that sufficient thermal grease is used to cover the entire bottom surface of the array,
but not so much that the thermal grease creeps up to the top of the array.
Figure 21: Recommended Assembly Method
Drawing Not to Scale
Bridgelux LS Array Series Product Data Sheet DS14 (03/14/11)
Page 24 of 30