VPOL16A-12-SMT CUI Inc, VPOL16A-12-SMT Datasheet - Page 5

• Manufacturer Part Number: VPOL16A-12-SMT
• Description: CONVERTR DC/DC .75/5VOUT 16A SMD
• Manufacturer: CUI Inc
• Series: V-Infinity VPOL16Ar
• Type: Point of Load (POL) Non-Isolatedr

Specifications of VPOL16A-12-SMT

• Output: 0.75 ~ 5V
• Number Of Outputs: 1
• Power (watts): 80W
• Mounting Type: Surface Mount
• Voltage - Input: 9 ~ 14V
• Package / Case: 6-DIP SMD Module
• 1st Output: 0.75 ~ 5 VDC @ 16A
• Size / Dimension: 1.30" L x 0.53" W x 0.37" H (33mm x 13.5mm x 9.3mm)
• Power (watts) - Rated: 80W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 94%
• Approvals: cUL, UL
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• 3rd Output: -
• 2nd Output: -
• Other names: 102-1294-2

PART NUMBER: VPOL16A-12-SMT
5. Main Features and Functions
5.1 Operating Temperature Range
V-Infinity’s VPOL16A-12-SMT series converters highly efficient
converter design has resulted in its ability to operate over a wide
ambient temperature environment ( -40° C to 85°C) . Due consideration
must be given to the de-rating curves when ascertaining maximum
power that can be drawn from the converter. The maximum power
drawn is influenced by a number of factors, such as:
5.2 Over-Temperature Protection (OTP)
The VPOL16A-12-SMT Series converters are equipped with non-
latching over-temperature protection. A temperat ure sensor monitors
the temperature of the hot spot (typically, top switch). If the temperature
exceeds a threshold of 130°C (typical) the converter will shut down,
disabling the output. When the temperature has decreased the
converter will automatically restart.
The over-temperature condition can be induced by a variety of reasons
such as external overload condition or a system fan failure.
5.3 Output Voltage Adjustment
Section 7.8 describes in detail as to how to trim the output voltage with
respect to its set point. The output voltage on all models is trimmable in
the range 0.75 – 5.0Vdc.
5.4 Safe Operating Area (SOA)
Figure 2 provides a graphical representation of the Safe Operating Area
(SOA) of the converter. This representation assumes ambient
operating conditions such as airflow are met as per thermal guidelines
provided in Sections 7.2 and 7.3.
Figure 2. Maximum Output Current Safe Operating Area
20050 SW 112
These can be effective heat sinks for the converter.
Input voltage range.
Output load current.
Air velocity (forced or natural convection).
Mounting orientation of converter PCB with respect to the Airflow.
Motherboard PCB design, especially ground and power planes.
Vo,nom
Vo
Safe Operating Area
th
Ave. Tualatin, Oregon 97062
CURRENT (A)
Io,max
Io,CL
Io
phone [phone] fax [phone]
DESCRIPTION: point of load converter
5.5 Over Current Protection
All different voltage models have a full continuous short-circuit
protection. The unit will auto recover once the short circuit is removed.
To provide pr otection in a fault condition, the unit is equipped with
internal over-current protection. The unit operates normally once the
fault condition is removed. The power module will supply up to 150% of
rated current. In the event of an over current converter will go into a
hiccup mode protection.
5.6 Remote ON/OFF
The remote ON/OFF input feature of the converter allows external
circuitry to turn the converter ON or OFF. Active-high remote ON/OFF
is available as standard. The VPOL16A-12-SMT are turned on if the
remote ON/OFF pin is high(=Vin), or left open. Setting the pin
low(<0.4Vdc) will turn the converter ‘Off’. The signal level of the remote
on/off input is defined with respect to ground. If not using the remote
on/off pin, leave the pin open (module will be on). The part number
suffix “N” is Negative remote ON/OFF version. The unit is guaranteed
OFF over the full temperature range if this voltage level exceeds
2.8Vdc. The converters are turned on If the on/off pin input is low
(<0.4Vdc) or left open. The recommended VPOL16A-12-SMT remote
on/off drive circuit as shown as figure 3, 4.
rev.
page
date
08/2007
5 of 12