PCM16YQ0 Microchip Technology, PCM16YQ0 Datasheet - Page 74

• Manufacturer Part Number: PCM16YQ0
• Description: MODULE PROC FOR 16F685,688-690
• Manufacturer: Microchip Technology

Specifications of PCM16YQ0

• Accessory Type: Processor Module
• Product: Microcontroller Modules
• Core Processor: PIC16F690
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: ICE2000
• For Use With: ICE2000 - EMULATOR MPLAB-ICE 2000 POD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

..
MPLAB
How Do I Order MPLAB® ICE?
Ordering MPLAB® ICE is as easy as 1, 2, and 3!
NOTE 1: Choose your PICmicro® MCU.
A Complete MPLAB® ICE System
MPLAB® ICE is a modular emulator system with interchangeable components allowing the system to be easily
configured to emulate different PICmicro® MCUs. Since this emulator supports package-specific emulation,
customers need to know which device and package they intend to emulate. Then, the customer can use the Cross
Reference Parts List on the following pages to identify the part numbers required to complete an MPLAB® ICE
system. A complete system consists of:
NOTE 1: An emulator pod (including among other things the host-to-pod parallel cable and power supply)
MPLAB
MPLAB
Emulator Pod
Power Switch
(on back)
2: Choose your PICmicro® MCU package.
3: Find the right line on the next few pages
2: A processor module
3: A device adapter
4: A transition socket
Emulator Pod
®
for MPLAB® ICE part numbers. You’re ready to order.
®
®
ICE 2000 and MPLAB
ICE 2000 Emulator
ICE 4000 Emulator
Power
Device Adapter
Host-to-Pod
Indicator Lights
Logic Probe
Connector
Processor Module
®
ICE 4000 Emulator Systems
Processor Module
Transition Socket
Flex Circuit Cable
Systems Products
Device Adapter
Transition Socket
DEVELOPMENT SYSTEMS
Components of the MPLAB® ICE emulator system are ordered as separate components. Knowing the terms will
make it easy to order and use the MPLAB® ICE emulator system. Read more about each component:
1. Emulator Pod
2. Processor Module
3. Device Adapter
4. Transition Socket
MPLAB
MPLAB® PM3 Programmer (DV007004) is Microchip’s production-rated programmer, which can be operated
stand-alone or with a PC using MPLAB® IDE (included free). The programmer comes complete with the
necessary accessories to connect to a host system, including a power supply and cables, giving the developer
complete control over the programming session. The programmer requires a socket module (sold separately),
which can be selected from the chart on the following pages by identifying the devices for programming and then
picking the appropriate part number from the respective columns. MPLAB® PM3 has built-in ICSP™ programming
capability.
In-Circuit Debuggers: MPLAB
MPLAB® ICD 2 is a low-cost, flash-based development tool that connects between the PC and the designer’s
target board allowing direct in-circuit debugging of the PICmicro® target microcontroller. Programs can be
executed in real time or single step, watch variables established, break points set, memory read/writes
accomplished and more. The MPLAB® ICD 2 can also be used as a development programmer for the
microcontrollers.
The MPLAB® ICE 2000 and MPLAB® ICE 4000 are full-featured emulator pods containing a main board with
an additional board for expanded trace memory and complex control logic. The MPLAB ICE 2000 pod comes
with a standard parallel interface cable that connects the pod to the parallel port of the PC. MPLAB® ICE 4000
also includes a USB interface cable that connects the pod to the USB port. Power supplies are included.
The processor module is a PICmicro®, device-specific module that is inserted into the emulator pod. The
processor module contains the emulator chip, logic, and low-voltage circuitry. A flex cable extends from the
processor module and is connected to the device adapter at the target application.
The device adapter provides a common interface for the PICmicro® MCU being emulated. This adapter
contains a special device that provides an oscillator clock allowing the user to accurately emulate the RC
characteristics of the PICmicro® MCU. The device adapter provides emulation support for standard DIP and
PLCC styles. For emulation support of other packages, a transition socket is needed along with the device
adapter.
The transition sockets are available in various styles to allow the common device adapter to be translated to
support surface-mount packages, such as SOIC, SSOP, PQFP, TQFP and MLF.
®
PM3 Programmers
®
ICD 2
DV007004
MPLAB® PM3
Socket Module
PAGE 72