CP2201EK Silicon Laboratories Inc, CP2201EK Datasheet - Page 7

• Manufacturer Part Number: CP2201EK
• Description: KIT EVAL FOR CP2201 ETH CTRLR
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of CP2201EK

• Main Purpose: Interface, Ethernet Sensor
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CP2200, CP2201
• Primary Attributes: Temperature and Light Sensor
• Secondary Attributes: Graphic User Interface
• Interface Type: Ethernet
• Product: Modules
• Silicon Manufacturer: Silicon Labs
• Silicon Core Number: CP2201
• Silicon Family Name: CP220x
• Kit Contents: CP2201 Evaluation Board, Power Adapter, CAT5e Ethernet Cable, CD-ROM, Quick-Start Guide
• For Use With/related Products: CP2201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1316

CP2201-EK
Clicking the second link on the main web page ‘2. Control Yellow LED’ will load the yellow LED control page shown
in Figure 10. Each of the links numbered 1 through 4 on this page borrow the yellow LED for 10 seconds and force
it to the state described in the text. The yellow LED state is restored after 10 seconds or if the 5th link ‘5. Restore
LED State’ is pressed. When finished going through the various LED states, click the ‘Home’ link to return to the
main page.
Figure 10. Yellow LED Control Page
6.3. Sending an E-mail Containing the Latest Sensor Data
To send an e-mail, the two pieces of information needed are the address of an SMTP server and the destination e-
mail address. This information can be entered in the HTML form on the main web page as shown in Figure 11. On
most networks, the SMTP server can be located by typing “ping mail” at the command prompt or asking a
system administrator. If the SMTP server address is unknown, a free software SMTP server that turns any
Windows PC into an outgoing mail server is available for download from http://www.gatecomm.com. Once the
software SMTP is running, use the PC’s IP address as the SMTP server address. The SMTP server address
cannot contain any letters—only numbers are permitted. The destination e-mail address must be less than 50
characters.
Figure 11. HTML Form Used For Sending E-Mail
Rev. 0.1
7