UCLAMP1211P.TCT Semtech, UCLAMP1211P.TCT Datasheet - Page 4

• Manufacturer Part Number: UCLAMP1211P.TCT
• Description: TVS ARRAY ESD PROT SLP1006P2 2P
• Manufacturer: Semtech
• Series: µClamp™r

Specifications of UCLAMP1211P.TCT

• Voltage - Reverse Standoff (typ): 12V
• Voltage - Breakdown: 13.3V
• Power (watts): 200W
• Polarization: Bidirectional
• Mounting Type: Surface Mount
• Package / Case: SLP1006P2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: UCLAMP1211PTR

Device Connection Options
This TVS diode is designed to protect one data,
I/O, or power supply line. The device is bidirectional
and may be used on lines where the signal polarity can
go above and below ground. The device is
symmetrical, and therefore, the orientation of the
device is not critical.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
PROTECTION PRODUCTS
Applications Information
2007 Semtech Corp.
Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
Minimize the path length between the TVS and the
protected line.
Minimize all conductive loops including power and
ground loops.
The ESD transient return path to ground should be
kept as short as possible.
Never run critical signals near board edges.
Use ground planes whenever possible.
4
Circuit Diagram
uClamp1211P
www.semtech.com