GZC15100 Sprague-Goodman, GZC15100 Datasheet - Page 9

• Manufacturer Part Number: GZC15100
• Description: CAP 10MM 10-150PF TOP/BOT ADJ OR
• Manufacturer: Sprague-Goodman
• Series: FILMTRIM® GZCr

Specifications of GZC15100

• Capacitance Range: 10 ~ 150pF
• Adjustment Type: Top and Bottom Adjustment
• Voltage - Rated: 100V
• Size / Dimension: Round - 0.433" Dia (11.00mm)
• Height: 0.472" (12.00mm)
• Mounting Type: Through Hole
• Features: General Purpose
• Package / Case: 10mm Round
• Voltage Rating: 200 Volts
• Operating Temperature Range: - 40 C to + 85 C
• Termination Style: Radial
• Product: Trimmer Capacitors - Film Dielectric
• Dimensions: 0.402 in W x 0.43 in L x 0.472 in H
• Lead Spacing: 0.39 in
• Temperature Coefficient: 0 PPM / C to + 350 PPM / C
• For Use With: SG9004 - TOOL PRODUCTION TUNING
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: SG3013

SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: [phone] • FAX: [phone] • E-MAIL: info@ spraguegoodman.com
©2002 SPRAGUE-GOODMAN ELECTRONICS, INC., ALL RIGHTS RESERVED.
* Extended temperature range: –40°C to +125°C
** GSX parts do not conform to part numbering system above.
For other modifications such as high temperature base material or special lead plating, contact factory.
SPECIFICATION NOTES
1. Parts are 100% tested for capacitance range and
2. Capacitance range specified is that which is
3. Q factor is measured at maximum rated
4. Dielectric strength is measured at maximum rated
5. Insulation resistance is measured at maximum rated
6. Temperature coefficient of capacitance (TCC) is
7. Axial load during tuning should not exceed 200
8. Capacitors should not be operated outside of rated
Symbol Description
GSX** PTFE
GC
GX
GY
dielectric withstanding voltage.
guaranteed, and is measured at 1 MHz at room
temperature.
capacitance and at room temperature.
capacitance and room temperature, with test
voltage (as listed for each model) applied for 60
seconds.
capacitance and room temperature and at rated
voltage, unless otherwise specified.
measured at 1 MHz over the operating temperature
range, with capacitor set at maximum rated
capacitance.
grams force. At maximum axial load, capacitance
change is no more than 15%.
capacitance range and working voltage.
GZ
Dielectric
PPS
(Polyphenyl
(Polytetrafluor-
PTFE
(Polytetrafluor-
PP
(Polypropylene)
PC or PI
(Polycarbonate
GX
or Polyimide)
Sulfide)
oethylene)
oethylene)
FILMTRIM
Symbol Description
A
B
C
D
E*
F*
L
N
P
Q* 6 x 8 mm Side Adjust
R*
T*
®
11 x 13 mm Top/Bottom Adjust
PLASTIC DIELECTRIC CAPACITORS
6 x 8 mm Top/Bottom Adjust,
PART NUMBERING SYSTEM
10 mm Top/Bottom Adjust,
10 mm Side Adjust
10 mm Top/Bottom Adjust
16 mm Top Adjust
16 mm Side Adjust
10 mm Side Adjust
8 mm Top/Bottom Adjust
8 mm Side Adjust
8 mm Top/Bottom Adjust
5 mm Top Adjust,
7 mm Economy
8 mm Side Adjust
Form Factor
A
PRINTED IN U.S.A.
Soldering and Cleaning
of FILMTRIM
Soldering Methods
(1) Reflow soldering for GSX series
(2) Dip soldering (does not apply to GSX models)
(3) Hand soldering (for lead-through-hole models)
(4) Hand soldering (GSX models)
Cleaning
(1) Water soluble fluxes and detergents with a water
(2) Do not immerse FILMTRIM models in chlorinated or
flush after soldering of the boards can be used for
GX, GY and GZ models.
fluorinated hydrocarbon solvents as this would
adversely affect the plastic dielectrics and base
materials. Some customers have successfully used
GX models in scrubbers or sprayers where only the
bottom of the printed circuit boards is exposed to
solvents. If the process requires immersion in solvents
for cleaning boards, the FILMTRIM capacitors should
be hand soldered to board after the boards have
been cleaned.
Industry Standard,
1R6 =
400 = 40.0 pF,
301 = 300.0 pF
Cap Code
Pre-heat: 140°C ±10°C for 2 to 3 minutes.
Soldering: 200 to 250°C within 25 seconds.
(Peak soldering temperature: 250°C maximum).
260°C ±10°C for 7 seconds maximum.
Soldering: Tip temperature 350°C ±10°C for
Preheating: Fully preheat on a hot plate with a
Soldering: 260°C ±10°C for 5 seconds maximum.
9R0
i.e.
1.6 pF,
®
Trimmer Capacitors
3 to 4 seconds
surface temperature of 100 to 150°C.
Symbol Description
01
02
03
04
11
12
25
(Top Adjust Models)
6 x 8 mm, 2 leads,
GXE and GXQ series
only
8 mm, 2 leads
10 mm, 3 lead, special
10 mm, 2 leads
6 x 8 mm, 3 leads
11 x 13 mm,
housing protected
(available on all 10 mm
top and bottom adjust
units)
Ammo pack version for
GCL only
Modifications
00
SG-402H
50204