MD-S8100-10(LF)(SN) JST Sales America Inc, MD-S8100-10(LF)(SN) Datasheet - Page 9

• Manufacturer Part Number: MD-S8100-10(LF)(SN)
• Description: CONN CIR 8 POS SHIELDED
• Manufacturer: JST Sales America Inc
• Series: MDr

Specifications of MD-S8100-10(LF)(SN)

• Connector Type: Receptacle, Female Sockets
• Number Of Positions: 8
• Mounting Type: Panel Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Orientation: Keyed
• Shell Material, Finish: Steel, Nickel Plated
• Features: Board Lock, Shielded
• Shell Size - Insert: -
• Ingress Protection: -
• Shell Size, Military: -
• Other names: Q3187370

• Split round contact provides maximum contact
• Flange construction
Specifications –––––––––––––––––––––––––––––––––––––––––––––––––––––
Materials
Characteristics
[Standard type/ Type B]
[Front shielding Type]
Note: Use soldering flux that is suitable for nickel-plating. Tin plated version is
Shielding cover
Receptacle (through-hole type)
area and contact redundancy
Contact
Housing / Holder
The receptacle contact is split to insure redundant connection
and is cylindrically shaped to provide maximum contact mating
area. The result is a highly reliable connection to the mating
pin. This superb contact performance is maintained even after
many mating and unmating cycles.
The flange construction allows the
receptacle to be secured on the
equipment chassis with screws,
ensuring more reliable electrical
connection.
Current rating
Voltage rating
Temperature range
Contact resistance
Withstanding voltage
Applicable PC board thickness
Shielding cover
Housing
Holder
Shielding tube
A spring lock
temporarily secures
the receptacle to the
printed circuit board.
Shielding tube
Shielding cover
also available.
Part name
Phosphor bronze, nickel-undercoated,
Phosphor bronze, nickel-undercoated silver-plated
Phosphor bronze, tin-plated (reflow treatment)
PBT, UL94V-0
1.0A, AC, DC
50V, AC, DC
-
Initial value: 100mΩ max.
After environmental testing: 300mΩ max.
500V AC/minute
1.6mm
Brass, nickel-plated (*note)
25˚C 〜
Brass, nickel-plated (*note)
Brass, nickel-undercoatd, tin/copper alloy-plated
+
85˚C(including temperature rise in applying electrical current)
Material and Finish
Mating part; gold-plated
Solder tail; tin-plated (reflow treatment)
provides maximum contact area
Standard type with flange shielding cover
round contact that at once
and contact redundancy.
The receptacle is a split
Contact
(Standard type/Type B)
• Compact, high-density design
• Spring locks make it easy to temporarily secure
(Front shielding type)
• Front shielding construction
• Effective shielding
Model number identification
Note: Contact JST for special plating requirements.
• Series name
• Product name: S ... Receptacle
• Circuits: 4, 5, 6, 7, 8, 9
• Shielding cover: 0 ... Without shielding cover
• Flange: 00 ... Without flange
• Type B indication
• Finish
receptacles to printed circuit boards for
soldering
This receptacle has a low profile with a mounting height of just
12.8mm and width of 14.0mm. It takes up little space on the
printed circuit board, allowing high-density product design.
The shielding tubes
are equipped with
spring locks which can
be used to temporarily
secure the receptacles
to printed circuit
boards. This prevents
the receptacles from
moving and ensures
reliable soldering.
A metal shielding cover integrating the connection part which
connects to the plug's shell is used. Because there is no gap
between the receptacle and the plug, this construction prevents
the entry of space conductive noise.
With the front shielding construction
and the flange construction, the
shielding effect is improved by
about 15 dB over the conventional
models.
B ... Type B (Applicable to Type B plug)
Blank...Standard type (Applicable to Standard and Type A plugs)
10 ... Gold-plated (flash)
13 ... 0.4micron gold-plated
14 ... 0.76micron gold-plated
70 ... Silver-plated
90 ... Tin-plated (reflow treatment)
...Front shielding type (Applicable to Standard and Type plugs)
30 ... With flange
50 ... With top flange with nuts
1 ... With shielding cover
3 ... With front shielding cover
MD CONNECTOR
Standard type without shielding cover (left)
Standard type with shielding cover (center)
Type B (applicable to Type B plug) (right)
MD
-
S
Front shielding type receptacle
8
0
00
B
-
10
9