71918-116LF FCI, 71918-116LF Datasheet - Page 12

• Manufacturer Part Number: 71918-116LF
• Description: CONN HEADER 16POS DUAL VERT PCB
• Manufacturer: FCI
• Series: Quickie™, Basics+r
• Type: PCB Plugr

Specifications of 71918-116LF

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 16
• Number Of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Contact Mating Length: 0.228" (5.80mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Latch Lock/Eject Hooks
• Contact Finish: Gold, GXT™
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Gray
• Product Type: Headers - Latch / Eject
• Number Of Positions / Contacts: 16
• Mounting Style: Through Hole
• Mounting Angle: Vertical
• Termination Style: Solder
• Contact Plating: Gold
• Agency Approvals: CSA, UL
• Angle: Straight
• Brand/series: Quickie®
• Current, Rating: 3 A
• Flammability Rating: UL94V-0
• Length, Overall: 59.94 mm
• Length, Pin: 0.114 "
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Mounting Hole Size: 1.02, 2.8 "
• Number Of Contacts: 16
• Pin Spacing: 2.54 mm
• Special Features: Eject Latch
• Temperature, Operating: -65 to +125 °C
• Voltage, Rating: 1500 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 609-1754

TITLE
Quickie™ Connector System
Copyright
Form E-3334
Rev E
FCI
3.7.2
3.7.3
3.7.4
Thermal Shock. After exposure of the mated connector to alternate periods of extreme
high and low temperature, there shall be no evidence of cracking or crazing of the
insulator or other physical damage to the connector; the dielectric withstanding voltage of
an unterminated connector shall be not less than 1,000 volts RMS, 60 Hz (see paragraph
3.5.5). The test shall be in accordance with MIL-STD-202, Method 107; the following
details shall apply:
(a) Test Condition - B (1 hour cycles)
(b) Temperature Range* - -65 to +105 o C
High Temperature Life. After exposure of the mated connector to a high temperature
operating environment, the insulation resistance of an unterminated connector shall be not
less than 100,000 megohms (see paragraph 3.5.4); the contact resistance of a terminated
connector shall not exceed 15 milliohms (see paragraph 3.5.2). The test shall be in
accordance with MIL-STD-202, Method 108; the following details shall apply:
(a) Test Chamber Temperature - 85 o C
(b) Test Condition (Duration)- B (250 hours)
(c) Operating Conditions - 1.0 ampere DC current (rated) through all contacts of
Shock. There shall be no evidence of physical or mechanical damage when the mated
connectors are subjected to transient accelerations. During and after each shock, the
contacts shall evidence no discontinuity greater than 1 microsecond. The test shall be in
accordance with MIL-STD-202, Method 213. The following details shall apply:
(a) Test Condition - I (l00G, 6ms sawtooth)
(b) Number of Shocks - 3 shocks in each direction along three orthogonal axes (18 total)
(c) Mounting - see Figure 5
terminated connector; duty cycle: 45 minutes ON and 15 minutes OFF.
TYPE
PRODUCT SPECIFICATION
PDM: Rev:F
STATUS:
NUMBER
PAGE
AUTHORIZED BY
CLASSIFICATION
M.Barrios
12 of 20
Released
BUS-12-082
UNRESTRICTED
Printed: Apr 13, 2007
REVISION
DATE
31 Jul 06
F
GS-01-001
.