PIC16F716-I/SO Microchip Technology, PIC16F716-I/SO Datasheet - Page 3

• Manufacturer Part Number: PIC16F716-I/SO
• Description: IC PIC MCU FLASH 2KX14 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F716-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 3.5KB (2K x 14)
• Package / Case: 18-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 13
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: RS- 232/USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 4-ch x 8-bit
• Package: 18SOIC W
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 20 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT18SO-1 - SOCKET TRANSITION 18SOIC 300MILI3-DB16F716 - BOARD DAUGHTER ICEPIC3AC162054 - HEADER INTERFACE ICD2 16F716AC164010 - MODULE SKT PROMATEII DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Silicon Errata Issues
1. Module: Silicon – Programming
2. Module: ECCP
 2010 Microchip Technology Inc.
Note:
The oscillator circuitry may prevent proper
initialization of the Programming mode when the
part is programmed in-circuit.
Work around
Tie the OSC1/EXTCLK pin (pin 16 of 18-pin
package or pin 18 of 20-pin package) to ground to
disable the oscillator during In-Circuit Serial
Programming
Affected Silicon Revisions
The ECCP module will override pin data of the
RB3/CCP1 pin when operating in Software
Interrupt mode (CCP1M = 0xA) or Special Event
Trigger mode (CCP1M = 0xB). The RB3/CCP1 pin
can be used as a general purpose input by setting
the TRISB3 bit. However, if the pin is configured as
an output, the ECCP module will always drive the
pin low.
This affects all released versions of silicon.
Work around
None.
Affected Silicon Revisions
A4
A4
X
X
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated by the shaded column in
the following tables apply to the current
silicon revision (A6).
A5
A5
X
™
A6
A6
.
X
3. Module: ECCP
The falling edge of the PWM waveform may be
extended by one system oscillator period if the
falling edge coincides with a write to the PORTB
register.
This affects all released versions of silicon.
Work around
Test the PWM pin status in software and postpone
writing to PORTB until the pin is low.
Affected Silicon Revisions
A4
X
A5
X
A6
X
PIC16F716
DS80184F-page 3