PIC16F684-I/ST Microchip Technology, PIC16F684-I/ST Datasheet - Page 274

• Manufacturer Part Number: PIC16F684-I/ST
• Description: IC PIC MCU FLASH 2KX14 14TSSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F684-I/ST

• Program Memory Type: FLASH
• Program Memory Size: 3.5KB (2K x 14)
• Package / Case: 14-TSSOP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 12
• Eeprom Size: 256 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 12
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163014, DM164120-4
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT14SS-1 - SOCKET TRANSITION 14DIP/14SSOP
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
16.6
DS31016A-page 16-24
Design Tips
Question 1:
Answer 1:
Ensure that you are using the correct SPI mode for that device. This SPI supports two of the four
SPI modes so ensure that the SPI device that you are trying to interface to is compatible with one
of these two modes. Check the clock polarity and the clock phase.
If the device is not compatible, switch to one of the Microchip devices that has the SSP module,
and that should solve this.
Question 2:
Answer 2:
This SSP module does not have master mode fully automated in hardware, see Application Note
AN578 for software which uses the SSP module to implement master mode. If you require a fully
automated Hardware implementation of I
Card for devices that have the Master SSP module.
Question 3:
Answer 3:
Ensure that you set the CKP bit to release the I
Note:
At the time of printing only the High-end family of devices (PIC17CXXX) have
devices with the Master SSP module implemented.
Using SPI mode, I do not seem able to talk to an SPI device.
Using I
Using I
transmit.
2
2
C mode, I do not seem able to make the master mode work.
C mode, I write data to the SSPBUF register, but the data did not
2
C master mode, please refer to the Microchip Line
2
C clock.
1997 Microchip Technology Inc.