PIC12C671-10/P Microchip Technology, PIC12C671-10/P Datasheet - Page 510

• Manufacturer Part Number: PIC12C671-10/P
• Description: IC MCU OTP 1KX14 A/D 8DIP
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671-10/P

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 10MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Ram Memory Size: 128Byte
• Cpu Speed: 10MHz
• No. Of Timers: 1
• Digital Ic Case Style: DIP
• Package: 8PDIP
• Device Core: PIC
• Family Name: PIC12
• Maximum Speed: 10 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 5
• On-chip Adc: 4-chx8-bit
• Number Of Timers: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMINGAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
28.1
DS31028A-page 28-2
Introduction
All midrange devices can be In-Circuit Serial Programmed (ICSP™) while in the end application
circuit. This is simply done with two lines for clock and data, and three other lines for power,
ground, and the programming voltage.
In-Circuit Serial Programming (ICSP™) is a great way to reduce your inventory overhead and
time-to-market for your product. By assembling your product with a blank Microchip microcontrol-
ler (MCU), you can stock one design. When an order has been placed, these units can be pro-
grammed with the latest revision of firmware, tested, and shipped in a very short time. This
method also reduces scrapped inventory due to old firmware revisions. This type of manufactur-
ing system can also facilitate quick turnarounds on custom orders for your product.
Most people would think to use ICSP with PICmicro™ OTP MCUs only on an assembly line
where the device is programmed once. However, there is a method by which an OTP device can
be programmed several times depending on the size of the firmware. This method, explained
later, provides a way to field upgrade your firmware in a way similar to EEPROM- or Flash-based
devices.
1997 Microchip Technology Inc.