PIC18F86J10-I/PT Microchip Technology, PIC18F86J10-I/PT Datasheet - Page 5

• Manufacturer Part Number: PIC18F86J10-I/PT
• Description: IC PIC MCU FLASH 32KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F86J10-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 66
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 15x10b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 66
• Ram Memory Size: 2048Byte
• Cpu Speed: 40MHz
• No. Of Timers: 5
• No. Of Pwm: RoHS Compliant
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 66
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM164120-5, DM183022, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 15 Channel
• Height: 1 mm
• Length: 12 mm
• Supply Voltage (max): 2.7 V, 3.6 V
• Supply Voltage (min): 2 V, 2.7 V
• Width: 12 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

14. Module: Enhanced Universal
EXAMPLE 3:
 2010 Microchip Technology Inc.
MOVF
BSF
BSF
MOVWF
Note:
With the auto-wake-up option enabled by setting
the WUE bit (BAUDCONx<1>), the RC1IF bit
(PIR1<5>) will become set on a high-to-low
transition on the RXx pin. While the WUE bit is set,
reading the receive buffer (RCREGx) will not clear
the RCxIF interrupt flag.
Because of this, RCxIF cannot be automatically
cleared by reading RCREGx until the WUE bit is
cleared.
Work around
Do the following:
1. Poll either the WUE bit or the RXx pin.
2. When WUE is clear or RXx is high, read
Date Codes that pertain to this issue:
All engineering and production devices.
RCREGx.
Step 2 clears RCxIF.
ADCON2, W
ADCON2, ADCS0
ADCON2, ADCS1
ADCON2
RCxIF can only be cleared by reading
RCREGx
Synchronous Asynchronous
Receiver Transmitter (EUSART)
;copy the value of ADCON2 to WREG
;temporarily select RC oscillator as clock
;restore ADCON2 to original value
PIC18F87J10 FAMILY
15. Module: 10-Bit Analog-to-Digital (A/D)
When the A/D conversion clock is selected to be
either F
bit cannot be set for a second conversion without
first selecting (temporarily) the RC oscillator as the
A/D conversion clock.
The A/D functions normally with the A/D
conversion clock settings of F
F
Work around
For A/D conversion clock settings of F
F
shown in Example 3 prior to setting the GO/DONE
bit for subsequent conversions.
It is recommended that this code be inserted
immediately after the A/D result has been read
from the previous conversion.
Date Codes that pertain to this issue:
All engineering and production devices.
RC
OSC
.
/32 or F
OSC
Converter
/64, F
OSC
OSC
/16, perform the work around
/32 or F
OSC
OSC
/16, the GO/DONE
DS80340B-page 5
/2, F
OSC
OSC
/4 and
/64,