PIC18F86J10-I/PT Microchip Technology, PIC18F86J10-I/PT Datasheet - Page 283

• Manufacturer Part Number: PIC18F86J10-I/PT
• Description: IC PIC MCU FLASH 32KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F86J10-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 66
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 15x10b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 66
• Ram Memory Size: 2048Byte
• Cpu Speed: 40MHz
• No. Of Timers: 5
• No. Of Pwm: RoHS Compliant
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 66
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM164120-5, DM183022, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 15 Channel
• Height: 1 mm
• Length: 12 mm
• Supply Voltage (max): 2.7 V, 3.6 V
• Supply Voltage (min): 2 V, 2.7 V
• Width: 12 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 23-5:
REGISTER 23-6:
© 2006 Microchip Technology Inc.
bit 7
bit 6
bit 5-4
bit 3
bit 2-0
bit 7-2
bit 1
bit 0
CONFIG3L: CONFIGURATION REGISTER 3 LOW (BYTE ADDRESS 300004h)
CONFIG3H: CONFIGURATION REGISTER 3 HIGH (BYTE ADDRESS 300005h)
bit 7
WAIT: External Bus Wait Enable bit
1 = Wait states for operations on external memory bus disabled
0 = Wait states for operations on external memory bus enabled
BW: Data Bus Width Select bit
1 = 16-bit External Bus mode
0 = 8-bit External Bus mode
EMB1:EMB0: External Memory Bus Configuration bits
11 = Microcontroller mode – external bus disabled
10 = Extended Microcontroller mode,12-bit Address mode
01 = Extended Microcontroller mode,16-bit Address mode
00 = Extended Microcontroller mode, 20-bit Address mode
EASHFT: External Address Bus Shift Enable bit
1 = Address shifting enabled; address on external bus is offset to start at 000000h
0 = Address shifting disabled; address on external bus reflects the PC value
Unimplemented: Read as ‘0’
bit 7
Unimplemented: Read as ‘0’
ECCPMX: ECCPx MUX bit
1 = ECCP1 outputs (P1B/P1C) are multiplexed with RE6 and RE5;
0 = ECCP1 outputs (P1B/P1C) are multiplexed with RH7 and RH6;
CCP2MX: ECCP2 MUX bit
1 = ECCP2/P2A is multiplexed with RC1
0 = ECCP2/P2A is multiplexed with RE7 in Microcontroller mode (all devices)
Legend:
R = Readable bit
-n = Value when device is unprogrammed
Legend:
R = Readable bit
-n = Value when device is unprogrammed
R/WO-1
WAIT
Note 1: Implemented only on 80-pin devices.
Note 1: Available only on 80-pin devices.
U-0
—
ECCP3 outputs (P3B/P3C) are multiplexed with RE4 and RE3
ECCP3 outputs (P3B/P3C) are multiplexed with RH5 and RH4
or with RB3 in Extended Microcontroller mode (80-pin devices only)
(1)
R/WO-1
BW
U-0
—
(1)
EMB1
R/WO-1
WO = Write-once bit
WO = Write-once bit
U-0
(1)
—
Preliminary
(1)
(1)
(1)
EMB0
R/WO-1
U-0
—
(1)
EASHFT
(1)
R/WO-1
U-0
—
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
(1)
(1)
PIC18F87J10
U-0
—
U-0
—
ECCPMX
R/WO-1
‘0’ = Bit is cleared
‘0’ = Bit is cleared
U-0
DS39663D-page 281
—
(1)
CCP2MX
R/WO-1
U-0
—
bit 0
bit 0