PIC18LF27J13-I/SS Microchip Technology, PIC18LF27J13-I/SS Datasheet - Page 541

• Manufacturer Part Number: PIC18LF27J13-I/SS
• Description: IC PIC MCU 128KB FLASH 28SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF27J13-I/SS

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 2.75 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: SSOP
• Supply Voltage Range: 1.8V To 3.6V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

APPENDIX A:
Revision A (March 2010)
Original data sheet for PIC18F47J13 family devices.
TABLE B-1:
 2010 Microchip Technology Inc.
Maximum Program Memory
Oscillator Options
SOSC Oscillator Options
T1CKI Clock Input
Timers
ECCP
CCP
SPI F
Option
Second I
ADC
Peripheral Module Disable
Bits
Band Gap Voltage Reference
Output
REPU/RDPU Pull-Up Enable
Bits
Comparators
Increased Output Drive
Strength
PWRT Period
OSC
Characteristic
2
/8 Master Clock
C™ Port
NOTABLE DIFFERENCES BETWEEN PIC18F47J13 AND PIC18F46J11 FAMILIES
REVISION HISTORY
13 Channel, 10/12-Bit Conversion modes
Three, each with four input pin selections.
Yes, enabled on pin, RA1, by setting the
PLL can be enabled at start-up with the
Low-power oscillator option for SOSC,
Moved to TRISE register (avoids read,
96 MHz PLL circuit is available via the
Default 4x PLL circuit is still available.
without enabling the Timer1 oscillator.
Yes, allowing further power reduction.
T1CKI can be used as a clock input
with Special Event Trigger option.
RA0 through RA5, RDx and REx.
Configuration bit setting, allowing
48 MHz operation from INTOSC.
VBGOE bit (WDTCON<4>).
Configuration bit option.
PIC18F47J13 Family
modify, write issues).
with run-time switch.
LF Devices – 46 ms
F Devices – 500
Yes, all packages.
128 Kbytes
Preliminary
Yes
8
3
7
s
PIC18F47J13 FAMILY
APPENDIX B:
Code for the devices in the PIC18F46J11 family can be
migrated to the PIC18F47J13 without many changes.
The differences between the two device families are
listed in Table B-1.
Pull-up bits configured in PORTE register
4x PLL circuit only. Maximum operating
Two, each with two input pin selections.
Requires firmware to set the PLLEN bit
Low-power oscillator option for SOSC,
only via the Configuration bit setting.
frequency from INTOSC is 32 MHz.
Yes, but only on 44-pin devices.
13 Channel, 10-bit only.
MIGRATION FROM
PIC18F46J11 TO
PIC18F47J13
LF Devices – 64 ms
18F46J11 Family
F Devices – 1 ms
at run time.
64 Kbytes
No
No
No
No
No
5
2
0
DS39974A-page 541