PIC24HJ32GP302-I/SO Microchip Technology, PIC24HJ32GP302-I/SO Datasheet - Page 6

• Manufacturer Part Number: PIC24HJ32GP302-I/SO
• Description: IC PIC MCU FLASH 32K 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ32GP302-I/SO

• Core Size: 16-Bit
• Program Memory Size: 32KB (11K x 24)
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: I²C, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC24
• No. Of I/o's: 21
• Ram Memory Size: 4KB
• Cpu Speed: 40MIPS
• No. Of Timers: 7
• No. Of Pwm Channels: 4
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel / 12 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164339 - MODULE SKT FOR PM3 28SOIC
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

11. Module: UART
12. Module: UART
13. Module: Comparator
DS80441F-page 6
The UART error interrupt may not occur, or may
occur at an incorrect time, if multiple errors occur
during a short period of time.
Work around
Read the error flags in the UxSTA register
whenever a byte is received to verify the error
status. In most cases, these bits will be correct,
even if the UART error interrupt fails to occur.
Affected Silicon Revisions
When the UART is operating in 8-bit mode
(PDSEL = 0x) and using the IrDA encoder/decoder
(IREN = 1), the module incorrectly transmits a data
payload of 80h as 00h.
Work around
None.
Affected Silicon Revisions
If CMCON<CxOUTEN> is set and the comparator
module
remappable comparator output pins, C1OUT and
C2OUT, cannot be used as general purpose I/O
pins.
Work around
When the comparator module is disabled the
CMCON<CxOUTEN> bit should be reset so that
the remappable comparator output pins C1OUT
and C2OUT are not driven onto the output pad.
Affected Silicon Revisions
A1
A1
A1
X
X
X
A2
A2
A2
X
X
X
CMCON<CxEN>
A3
A3
A3
X
X
X
A4
A4
A4
X
X
X
is
disabled,
the
14. Module: Internal Voltage Regulator
15. Module: PSV Operations
When the VREGS bit (RCON<8>) is set to a logic
‘0’ the device may reset and higher Sleep current
may be observed.
Work around
Ensure VREGS bit (RCON<8>) is set to a logic ‘1’
for device Sleep mode operation.
Affected Silicon Revisions
An address error trap occurs in certain addressing
modes when accessing the first four bytes of an
PSV page. This only occurs when using the
following addressing modes:
Work around
Do not perform PSV accesses to any of the first
four bytes using the above addressing modes. For
applications using the C language, MPLAB C30
version 3.11 or higher, provides the following
command-line switch that implements a work
around for the erratum.
-merrata=psv_trap
Refer to the readme.txt file in the MPLAB C30
v3.11 tool suite for further details.
Affected Silicon Revisions
• MOV.D
• Register Indirect Addressing (Word or Byte
A1
A1
X
mode) with pre/post-decrement
X
A2
A2
X
X
A3
A3
X
X
© 2010 Microchip Technology Inc.
A4
A4
X
X