PIC24FJ128GA106-I/PT Microchip Technology, PIC24FJ128GA106-I/PT Datasheet - Page 8

• Manufacturer Part Number: PIC24FJ128GA106-I/PT
• Description: IC PIC MCU FLASH 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ128GA106-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (43K x 24)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDMA240015 - BOARD MCV PIM FOR 24F256GA
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FJ256GA110 FAMILY
22. Module: Core (Code Protection)
23. Module: SPI/PPS
DS80368J-page 8
When General Segment Code Protection has
been enabled (GCP Configuration bit is pro-
grammed), applications are unable to write to the
first 512 bytes of the program memory space
(0000h through 0200h). In applications that may
require the interrupt vectors to be changed during
run time, such as bootloaders, modifications to the
interrupt vector tables will not be possible.
Work around
Create two new interrupt vector tables, one each
for the IVT and AIVT, in an area of program space
beyond the affected region. Map the addresses in
the old vector tables to the new tables. These new
tables can then be modified as needed to the
actual addresses of the ISRs.
Affected Silicon Revisions
The ALTRP/ASCK1 functionality is not supported
by the A3 revision of this part family.
Work around
None.
Affected Silicon Revisions
A3
A3
X
X
A5
A5
24. Module: Oscillator (LPRC)
25. Module: CTMU (A/D Trigger)
The LPRC may not automatically restart following
BOR events (i.e., when supply voltage sags to
between the BOR and POR thresholds, then
returns to above the BOR level). When this hap-
pens, systems that use the LPRC clock may not
work. This includes the PLL, Two-Speed Start-up,
Fail-Safe Clock Monitor and the WDT.
Work around
For PLL issues: Select a non-PLL Clock mode as
the initial start-up mode, using the FNOSC Config-
uration bits (CW2<10:8>). After the application has
initialized, switch to a PLL Clock mode in software
using the NOSC bits (OSCCON<10:8>). Allow
10 microseconds to elapse between application
start-up and a software clock switch.
For WDT issues: Disable the WDT by programming
the FWDTEN bit (CW1<7>). After the application
has initialized, enable the WDT in software by
setting the SWDTEN bit (RCON<5>). Allow
10 microseconds to elapse between application
start-up and setting SWDTEN.
Affected Silicon Revisions
The CTMU may not trigger an automatic A/D con-
version after the current source is turned off. This
happens even when the A/D trigger control bit,
CTTRIG (CTMUCON<8>), has been set.
Work around
Perform a manual A/D conversion by clearing the
SAMP bit (AD1CON1<1>) immediately after the
CTMU current source has been stopped.
Affected Silicon Revisions
A3
A3
X
X
A5
A5
 2010 Microchip Technology Inc.