PIC24HJ64GP506-I/PT Microchip Technology, PIC24HJ64GP506-I/PT Datasheet - Page 27

• Manufacturer Part Number: PIC24HJ64GP506-I/PT
• Description: IC PIC MCU FLASH 32KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP506-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 18x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: 3-Wire/I2C/USART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 13
• Operating Supply Voltage: 0 V to 2.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 18-ch x 12-bit
• Controller Family/series: PIC24
• No. Of I/o's: 53
• Ram Memory Size: 8KB
• Cpu Speed: 40MIPS
• No. Of Timers: 13
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM300019 - BOARD DEMO DSPICDEM 80L STARTERDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

9.0
9.1
The PIC24H instruction set provides a broad suite of
instructions which supports traditional microcontroller
applications, and a class of instructions which supports
math-intensive applications. Since almost all of the
functionality of the PICmicro MCU instruction set has
been maintained, this hybrid instruction set allows a
friendly migration path for users already familiar with
the PICmicro microcontroller.
9.2
The PIC24H instruction set contains 76 instructions
which can be grouped into the ten functional categories
shown in Table 9-1. Table 9-2 defines the symbols
used in the instruction summary tables, Table 9-3
through Table 9-11. These tables define the syntax,
description, storage and execution requirements
for each instruction. Storage requirements are repre-
sented in 24-bit instruction words and execution
requirements are represented in instruction cycles.
Most instructions have several different addressing
modes and execution flows which require different
instruction variants. For instance, there are six unique
ADD instructions and each instruction variant has its
own instruction encoding.
TABLE 9-1:
© 2005 Microchip Technology Inc.
Move Instructions
Math Instructions
Logic Instructions
Rotate/Shift Instructions
Bit Instructions
Compare/Skip Instructions
Program Flow Instructions
Shadow/Stack Instructions
Control Instructions
Functional Group
PIC24H INSTRUCTION SET
Introduction
Instruction Set Overview
PIC24H INSTRUCTION
GROUPS
Summary Table
Table 9-10
Table 9-11
Table 9-3
Table 9-4
Table 9-5
Table 9-6
Table 9-7
Table 9-8
Table 9-9
Preliminary
9.2.1
As the instruction summary tables show, most
instructions execute in a single cycle with the following
exceptions:
• Instructions MOV.D, POP.D, PUSH.D,
• Instructions DIVF, DIV.S, DIV.U are single-
• Instructions that change the Program Counter
• The RETFIE, RETLW and RETURN are special
9.2.2
As the instruction summary tables show, almost all
instructions consume one instruction word (24 bits),
with the exception of the CALL and GOTO instructions,
which are flow instructions listed in Table 9-9. These
instructions require two words of memory because their
opcodes embed large literal operands.
TBLRDH, TBLRDL, TBLWTH and TBLWTL
require 2 cycles to execute.
cycle instructions, which should be executed
18 consecutive times as the target REPEAT
instruction.
also require 2 cycles to execute, with the extra
cycle executed as a NOP. Skip instructions, which
skip over a 2-word instruction, require 3
instruction cycles to execute with 2 cycles
executed as a NOP.
cases of instructions that change the Program
Counter. These execute in 3 cycles unless an
exception is pending, and then they execute in
2 cycles.
Note:
MULTI-CYCLE INSTRUCTIONS
MULTI-WORD INSTRUCTIONS
Instructions that access program memory
as data, using Program Space Visibility,
incur some cycle count overhead.
PIC24H
DS70166A-page 25