PIC24HJ128GP504-I/ML Microchip Technology, PIC24HJ128GP504-I/ML Datasheet - Page 263

• Manufacturer Part Number: PIC24HJ128GP504-I/ML
• Description: IC PIC MCU FLASH 128K 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ128GP504-I/ML

• Core Size: 16-Bit
• Program Memory Size: 128KB (43K x 24)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Controller Family/series: PIC24
• No. Of I/o's: 35
• Ram Memory Size: 8192Byte
• Cpu Speed: 40MHz
• No. Of Timers: 7
• No.: RoHS Compliant
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 9
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 13 Channel
• A/d Bit Size: 12 bit
• A/d Channels Available: 13
• Height: 0.88 mm
• Length: 8 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Width: 8 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDAC164336 - MODULE SOCKET FOR PM3 28/44QFNDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

TABLE 25-2:
© 2009 Microchip Technology Inc.
Note 1: This Configuration register is not available on PIC24HJ32GP302/304 devices.
POSCMD<1:0>
FNOSC<2:0>
FCKSM<1:0>
OSCIOFNC
GSS<1:0>
IOL1WAY
WDTPRE
FWDTEN
Bit Field
WINDIS
GWRP
IESO
PIC24H CONFIGURATION BITS DESCRIPTION (CONTINUED)
FOSCSEL
FOSCSEL
Register
FWDT
FOSC
FOSC
FOSC
FOSC
FWDT
FWDT
FGS
FGS
General Segment Code-Protect bit
11 = User program memory is not code-protected
10 = Standard security
0x = High security
General Segment Write-Protect bit
1 = User program memory is not write-protected
0 = User program memory is write-protected
Two-speed Oscillator Start-up Enable bit
1 = Start-up device with FRC, then automatically switch to the
0 = Start-up device with user-selected oscillator source
Initial Oscillator Source Selection bits
111 = Internal Fast RC (FRC) oscillator with postscaler
110 = Internal Fast RC (FRC) oscillator with divide-by-16
101 = LPRC oscillator
100 = Secondary (LP) oscillator
011 = Primary (XT, HS, EC) oscillator with PLL
010 = Primary (XT, HS, EC) oscillator
001 = Internal Fast RC (FRC) oscillator with PLL
000 = FRC oscillator
Clock Switching Mode bits
1x = Clock switching is disabled, Fail-Safe Clock Monitor is disabled
01 = Clock switching is enabled, Fail-Safe Clock Monitor is disabled
00 = Clock switching is enabled, Fail-Safe Clock Monitor is enabled
Peripheral pin select configuration
1 = Allow only one reconfiguration
0 = Allow multiple reconfigurations
OSC2 Pin Function bit (except in XT and HS modes)
1 = OSC2 is clock output
0 = OSC2 is general purpose digital I/O pin
Primary Oscillator Mode Select bits
11 = Primary oscillator disabled
10 = HS Crystal Oscillator mode
01 = XT Crystal Oscillator mode
00 = EC (External Clock) mode
Watchdog Timer Enable bit
1 = Watchdog Timer always enabled (LPRC oscillator cannot be disabled.
0 = Watchdog Timer enabled/disabled by user software (LPRC can be
Watchdog Timer Window Enable bit
1 = Watchdog Timer in Non-Window mode
0 = Watchdog Timer in Window mode
Watchdog Timer Prescaler bit
1 = 1:128
0 = 1:32
Clearing the SWDTEN bit in the RCON register has no effect.)
disabled by clearing the SWDTEN bit in the RCON register)
Preliminary
user-selected oscillator source when ready
Description
DS70293D-page 263