DSPIC30F5013-30I/PT Microchip Technology, DSPIC30F5013-30I/PT Datasheet - Page 10

• Manufacturer Part Number: DSPIC30F5013-30I/PT
• Description: IC DSPIC MCU/DSP 66K 80TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F5013-30I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 66KB (22K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of I/o's: 68
• Flash Memory Size: 66KB
• Supply Voltage Range: 2.5V To 5.5V
• Package: 80TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 68
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 16-chx12-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300024 - KIT DEMO DSPICDEM 1.1XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPDM300004-2 - BOARD DEMO DSPICDEM.NET 2DM300004-1 - BOARD DEMO DSPICDEM.NET 1AC30F007 - MODULE SKT FOR DSPIC30F 80TQFPDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: DSPIC30F501330IPT

dsPIC30F5011/5013
8. Module: DCI
9. Module: PLL
DS80453E-page 10
For this release of silicon, the DCI module should
not be stopped when the device enters Idle mode.
Work around
Do not set the DCISIDL bit (DCICON1<13>). This
will ensure the DCI module continues to run when
the device enters Idle mode.
Affected Silicon Revisions
When the 4x PLL mode of operation is selected, the
specified input frequency range of 4 MHz-10 MHz is
not fully supported.
When device V
frequency must be in the range of 4 MHz-5 MHz.
When device V
frequency must be in the range of 4 MHz-6 MHz
for both industrial and extended temperature
ranges.
Work around
1. Use 8x PLL or 16x PLL mode of operation and
2. Use the EC without PLL Clock mode with a
Affected Silicon Revisions
A1
A1
X
X
set final device clock speed using the
POST<1:0> oscillator postscaler control bits
(OSCCON<7:6>).
suitable clock frequency to obtain the equivalent
4x PLL clock rate.
A2
A2
X
X
A3
A3
X
X
DD
DD
is 2.5V-3.0V, the 4x PLL input
is 3.0V-3.6V, the 4x PLL input
A4
A4
X
X
© 2010 Microchip Technology Inc.