PIC24HJ32GP202-I/SP Microchip Technology, PIC24HJ32GP202-I/SP Datasheet - Page 181

• Manufacturer Part Number: PIC24HJ32GP202-I/SP
• Description: IC PIC MCU FLASH 32K 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ32GP202-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 32KB (11K x 24)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164337 - MODULE SOCKET FOR PM3 40DIP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

18.7
PIC24HJ32GP202/204 and PIC24HJ16GP304 family
microcontrollers can be serially programmed while in
the end application circuit. This is done with two lines
for clock and data, and three other lines for power,
ground and the programming sequence. Serial pro-
gramming allows customers to manufacture boards
with unprogrammed devices and then program the
microcontroller just before shipping the product. Serial
programming also allows the most recent firmware or a
custom firmware to be programmed. Refer to the
“dsPIC30F/33F Flash Programming Specification”
(DS70152) document for details about In-Circuit Serial
Programming (ICSP).
Any of the following three pairs of programming clock/
data pins can be used:
• PGC1/EMUC1 and PGD1/EMUD1
• PGC2/EMUC2 and PGD2/EMUD2
• PGC3/EMUC3 and PGD3/EMUD3
© 2007 Microchip Technology Inc.
In-Circuit Serial Programming
PIC24HJ32GP202/204 and PIC24HJ16GP304
Preliminary
18.8
When MPLAB
circuit debugging functionality is enabled. This function
allows simple debugging functions when used with
MPLAB IDE. Debugging functionality is controlled
through the
Emulation/Debug Data (EMUDx) pin functions.
Any of the following three pairs of debugging clock/data
pins can be used:
• PGC1/EMUC1 and PGD1/EMUD1
• PGC2/EMUC2 and PGD2/EMUD2
• PGC3/EMUC3 and PGD3/EMUD3
To make use of the in-circuit debugger function of the
device, the design must implement ICSP connections
to MCLR, V
EMUCx pin pair. In addition, when the feature is
enabled, some of the resources are not available for
general use. These resources include the first 80 bytes
of data RAM and two I/O pins.
In-Circuit Debugger
DD
®
Emulation/Debug Clock (EMUCx) and
, V
ICD 2 is selected as a debugger, the in-
SS
, PGC, PGD and the EMUDx/
DS70289A-page 179