PIC24HJ256GP610-I/PT Microchip Technology, PIC24HJ256GP610-I/PT Datasheet - Page 19

• Manufacturer Part Number: PIC24HJ256GP610-I/PT
• Description: IC PIC MCU FLASH 128KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ256GP610-I/PT

• Core Size: 16-Bit
• Program Memory Size: 256KB (85.5K x 24)
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b, 32x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• Controller Family/series: PIC24
• No. Of I/o's: 85
• Ram Memory Size: 16KB
• Cpu Speed: 40MIPS
• No. Of Timers: 13
• No. Of Pwm Channels: 8
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: CAN, I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 13
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (12 bit, 32 Channel)
• A/d Bit Size: 12 bit
• A/d Channels Available: 32
• Height: 1 mm
• Length: 12 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Width: 12 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDAC164333 - MODULE SKT FOR PM3 100QFPDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

43. Module: UART
44. Module: SPI
45. Module: I
© 2010 Microchip Technology Inc.
When the UART is configured for IR interface
operations (UxMODE<9:8> = 11), the 16x baud
clock signal on the BCLK pin is present only when
the module is transmitting. The pin is idle at all
other times.
Work around
Configure one of the output compare modules to
generate the required baud clock signal when the
UART is receiving data or in an Idle state.
Affected Silicon Revisions
Setting the DISSCK bit in the SPIxCON1 register
does not allow the user application to use the SCK
pin as a general purpose I/O pin.
Work around
None.
Affected Silicon Revisions
The BCL bit in I2CSTAT can be cleared only with
16-bit operation, and can be corrupted with 1-bit or
8-bit operations on I2CSTAT.
Work around
Use 16-bit operations to clear BCL.
Affected Silicon Revisions
A2
A2
A2
X
X
X
A3
A3
A3
X
X
X
2
C
A4
A4
A4
X
X
X
PIC24HJXXXGPX06/X08/X10
46. Module: I
47. Module: I
48. Module: I
If there are two I
them acts as the master receiver and the other
acts as the slave transmitter. If both devices are
configured for 10-bit Addressing mode, and have
the same value in the A10 and A9 bits of their
addresses: then, when the slave select address is
sent from the master, both the master and slave
acknowledge it. When the master sends out the
read operation, both the master and the slave
enter into Read mode, and both of them transmit
the data. The resultant data will be the ANDing of
the two transmissions.
Work around
In all I
A10 and A9, should be different.
Affected Silicon Revisions
If the I
with an address of 0x102, the I2CxRCV register
content for the lower address byte is 0x01, rather
than
acknowledges both address bytes.
Work around
None.
Affected Silicon Revisions
With the I
external interrupt input functions associated with
the SCL and SDA pins (if any) do not reflect the
actual digital logic levels on the pins.
Work around
If the SDA and/or SCL pins need to be polled,
these pins should be connected to other port pins
to be read correctly. This issue does not affect the
operation of the I
Affected Silicon Revisions
A2
A2
A2
X
X
X
2
2
C devices, the addresses, as well as bits
C module is configured as a 10-bit slave
0x02.
A3
A3
A3
X
X
X
2
C module enabled, the PORT bits and
2
2
2
C
C
C
A4
A4
A4
X
X
X
However,
2
2
C module.
C devices on the bus, one of
the
DS80444D-page 19
I
2
C
module