DS2250-32-16+ Maxim Integrated Products, DS2250-32-16+ Datasheet - Page 5

• Manufacturer Part Number: DS2250-32-16+
• Description: IC MCU 32KB 16MHZ 40-SIMM
• Manufacturer: Maxim Integrated Products
• Series: DS225xr

Specifications of DS2250-32-16+

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SIO, UART/USART
• Peripherals: Power-Fail Reset, WDT
• Number Of I /o: 32
• Program Memory Type: SRAM
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 4.75 V ~ 5.25 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-SIMM
• Processor Series: DS2250
• Core: 8051
• Data Bus Width: 8 bit
• Program Memory Size: 32 KB
• Data Ram Size: 32 KB
• Interface Type: 3-Wire, RS-232, UART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 2
• Operating Supply Voltage: 4.75 V to 5.25 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

PROGRAM LOADING
The Program Load Modes allow initialization of the NV RAM Program/Data Memory. This initialization
may be performed in one of two ways:
1. Serial Program Loading which is capable of performing Bootstrap Loading of the DS2250(T). This
2. Parallel Program Load cycles which perform the initial loading from parallel address/data information
The DS2250(T) is placed in its Program Load configuration by simultaneously applying a logic 1 to the
RST pin and forcing the
will look for a parallel Program Load pulse, or a serial ASCII carriage return (0DH) character received at
9600, 2400, 1200, or 300 bps over the serial port.
The hardware configurations used to select these modes of operation are illustrated in Figure 3.
PROGRAM LOADING CONFIGURATIONS Figure 3
feature allows the loading of the application program to be delayed until the DS2250(T) is installed in
the end system.
presented on the I/O port pins. This mode is timing set-compatible with the 87C51H microcontroller
programming mode.
PSEN
line to a logic 0 level. Immediately following this action, the DS2250(T)
5 of 18