PIC16C717-I/P Microchip Technology, PIC16C717-I/P Datasheet - Page 2

• Manufacturer Part Number: PIC16C717-I/P
• Description: IC MCU CMOS A/D 2K 20MHZ 18-DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C717-I/P

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Type: OTP
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-DIP (0.300", 7.62mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 16
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• No. Of: RoHS Compliant
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SPI, SSP
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 3 bit
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 6 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC16C717I/P

SSP MODULE
Clarifications/Corrections to the Data
Sheets
1. Module: SSP (SPI Mode)
The description of the operation of the CKE bit
(SSPSTAT<6>) is clarified. Please substitute the
description in Register 1, below, for all occurrences of
the existing text for the SSPSTAT register, bit 6 (new
text in bold).
REGISTER 1:
DS80132F-page 2
Note:
Note:
This correction applies to the Data Sheets
for the following devices:
• PIC16C62B/72A (DS35008B)
• PIC16C63A/65B/73B/74B (DS30605C)
• PIC16C923/924 (DS30444E)
• PIC16C925/926 (DS39544A)
• PIC16F72 (DS39597B)
• PIC16F73/74/76/77 (DS30325B)
• PIC18F2331/2431/4331/4431
In addition, this clarification applies only to
the following devices in the PIC16C6X
Data Sheet (DS30234D):
• PIC16C66
• PIC16C67
In addition, this clarification applies only to
the following devices in the PIC16C7X
Data Sheet (DS30390E):
• PIC16C76
• PIC16C77
Any devices not explicitly listed in this
section do not implement SPI mode and
are not affected by this clarification.
bit 6
This text refers only to the operation of the
CKE bit in SPI mode; its operation in I
mode is unchanged.
(DS39616B)
SSPSTAT: SSP STATUS REGISTER (EXCERPT)
CKE: SPI Clock Edge Select bit
1 = Transmit occurs on transition from active to Idle clock state
0 = Transmit occurs on transition from Idle to active clock state
Note:
Polarity of clock state is set by the CKP bit (SSPCON<4>).
2
C
2. Module: SSP (SPI Slave Mode)
The description of the operation of SPI Slave mode is
clarified as follows:
Before enabling the module in SPI Slave mode, the
state of the clock line (SCK) must match the polarity
selected for the Idle state. The clock line can be
observed by reading the SCK pin. The polarity of the
Idle state is determined by the CKP bit (SSPCON<4>).
This foregoing text should be added to the appropriate
subsections of the “SSP Module” chapter, entitled “SPI
Mode” and read in context with any discussions of SPI
Slave mode.
In the case of DS30234D, the text applies to both
implementations of SPI mode, as described in
Sections 11.2 and 11.3.
Note:
This correction applies to the Data Sheets
for the following devices:
• PIC16C6X (DS30234D), except
• PIC16C62B/72A (DS35008B)
• PIC16C63A/65B/73B/74B (DS30605C)
• PIC16C72/73/73A/74/74A/76/77
• PIC16C923/924 (DS30444E)
• PIC16C925/926 (DS39544A)
• PIC16F72 (DS39597B)
• PIC16F73/74/76/77 (DS30325B)
• PIC18F2331/2431/4331/4431
Any other devices not explicitly listed in this
section do not implement SPI mode and
are not affected by this clarification.
PIC16C61 (does not implement the
SSP module)
(DS30390E)
(DS39616B)
© 2007 Microchip Technology Inc.