PIC16F1936-I/SP Microchip Technology, PIC16F1936-I/SP Datasheet - Page 20

• Manufacturer Part Number: PIC16F1936-I/SP
• Description: IC PIC MCU FLASH 512KX14 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1936-I/SP

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Controller Family/series: PIC16F
• No. Of I/o's: 25
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 512Byte
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: EUSART, MI2C, SPI
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC16F193X/LF193X
4.3.11
The Bulk Erase Program Memory command performs
two different functions dependent on the current state
of the address.
A Bulk Erase Program Memory command should not
be issued when the address is greater than 8008h.
FIGURE 4-11:
4.3.12
To perform an erase of the data memory, after a Bulk
Erase Data Memory command, wait a minimum of
T
To erase data memory when data code-protect is active
(CPD = 0), the Bulk Erase Program Memory command
should be used.
FIGURE 4-12:
DS41360A-page 20
Address 0000h-7FFFh:
Address 8000h-8008h:
ERAB
Program Memory is erased
Configuration words are erased
If CPD = 0, Data Memory is erased
Program Memory is erased
Configuration Words are erased
User ID Locations are erased
If CPD = 0, Data Memory is erased
to complete Bulk Erase.
BULK ERASE PROGRAM MEMORY
BULK ERASE DATA MEMORY
ICSPCLK
ICSPDAT
ICSPCLK
ICSPDAT
BULK ERASE PROGRAM MEMORY
BULK ERASE DATA MEMORY COMMAND
1
1
1
1
2
0
2
1
Advance Information
3
3
0
0
4
4
1
1
5
5
0
X
After receiving the Bulk Erase Program Memory com-
mand the erase will not complete until the time interval,
T
After receiving the Bulk Erase Data Memory command,
the erase will not complete until the time interval,
T
ERAB
ERAB
Note:
Note:
6
Wait a minimum of
X
6
, has expired.
, has expired.
X
T
ERAB
The code protection Configuration bit (CP)
has no effect on the Bulk Erase Program
Memory command.
Data
code-protected (CPD = 0).
T
ERAB
1
X
memory
Next Command
2
© 2008 Microchip Technology Inc.
Next Command
0
1
X
will
2
X
not
3
erase
X
if