PIC18F25K22-I/ML Microchip Technology, PIC18F25K22-I/ML Datasheet - Page 152

• Manufacturer Part Number: PIC18F25K22-I/ML
• Description: MCU 8BIT 32KB FLASH 5.5V 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F25K22-I/ML

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 19x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC18
• No. Of I/o's: 25
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 1536Byte
• Cpu Speed: 64MHz
• No. Of Timers: 7
• Processor Series: PIC18F
• Core: PIC
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164005
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 16 MHz
• Data Ram Size: 1.5 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 25
• Number Of Timers: 7
• Operating Supply Voltage: 1.8 V to 5.5 V
• Operating Temperature Range: - 40 C to + 85 C
• A/d Bit Size: 10 bit
• A/d Channels Available: 17
• Height: 0.48 mm
• Interface Type: I2C, SPI, USART
• Length: 4 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Width: 4 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18(L)F2X/4XK22
REGISTER 10-2:
REGISTER 10-3:
DS41412D-page 152
bit 7
Legend:
R = Readable bit
‘1’ = Bit is set
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-4
bit 3
bit 2-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5
bit 4
bit 3-0
U-0
U-0
—
—
2:
3:
Port is available as input only when MCLRE = 0.
Writes to PORTx are written to corresponding LATx register. Reads from PORTx register is return of I/O
pin values.
Available on PIC18(L)F4XK22 devices.
Unimplemented: Read as ‘0’
RE3: PORTE Input bit value
RE<2:0>: PORTE I/O bit values
Unimplemented: Read as ‘0’
ANSA5: RA5 Analog Select bit
1 = Digital input buffer disabled
0 = Digital input buffer enabled
Unimplemented: Read as ‘0’
ANSA<3:0>: RA<3:0> Analog Select bit
1 = Digital input buffer disabled
0 = Digital input buffer enabled
U-0
U-0
—
—
PORTE: PORTE REGISTER
ANSELA – PORTA ANALOG SELECT REGISTER
W = Writable bit
‘0’ = Bit is cleared
W = Writable bit
‘1’ = Bit is set
ANSA5
R/W-1
U-0
—
(1)
(2), (3)
U-0
U-0
Preliminary
—
—
U = Unimplemented bit, read as ‘0’
x = Bit is unknown
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-u/x
ANSA3
RE3
R/W-1
(1)
RE2
R/W-u/x
ANSA2
R/W-1
(2), (3)
 2010 Microchip Technology Inc.
x = Bit is unknown
RE1
R/W-u/x
ANSA1
R/W-1
(2), (3)
RE0
R/W-u/x
ANSA0
R/W-1
(2), (3)
bit 0
bit 0