PIC18LF25J11-I/ML Microchip Technology, PIC18LF25J11-I/ML Datasheet - Page 7

• Manufacturer Part Number: PIC18LF25J11-I/ML
• Description: IC PIC MCU FLASH 32K 2V 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF25J11-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 31 KHz
• Number Of Programmable I/os: 16
• Number Of Timers: 5
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183022, DM183032, DV164136, MA180023
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 10
• Height: 0.88 mm
• Length: 6 mm
• Supply Voltage (max): 2.75 V, 3.6 V
• Supply Voltage (min): 2 V
• Width: 6 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

12. Module: Analog-to-Digital Converter
 2010 Microchip Technology Inc.
At the beginning of sample acquisition, one or
more small pull-up pulses (approximately 25 ns
long) may output to the currently selected ANx
analog channel. These pulses can lead to a pos-
itive offset error when the analog signal voltage
is near V
is unable to dissipate the added pull-up voltage
before the A/D conversion occurs.
Work around
Do one or more of the following:
• Use the “0 T
• Use a longer A/D Acquisition Time setting to
• Use low-impedance, active analog signal
• Experiment with external filter capacitor
Affected Silicon Revisions
A2
to start the next sample acquisition period
immediately following A/D conversion
completion.
This allows the external analog signal driver
more time to dissipate the pull-up pulses that
occur when the sample acquisition is started.
provide time for the external analog signal
driver to dissipate the pull-up pulse voltage.
drivers to reduce the time needed to dissipate
the pull-up pulse voltage.
values to avoid allowing the pull-up voltage
offset to affect the final voltage that gets
converted.
Small filter capacitor values (or none at all) will
allow time for the external analog signal driver
to dissipate the pull-up voltage quickly. Alter-
nately, large filter capacitor values will prevent
the short pull-up pulses from increasing the
final voltage enough to cause A/D conversion
error.
X
A4
X
SS
(A/D)
and the external analog signal driver
AD
” A/D Acquisition Time setting
PIC18F46J11 FAMILY
DS80435H-page 7