DSPIC30F2011-30I/SO Microchip Technology, DSPIC30F2011-30I/SO Datasheet - Page 6

• Manufacturer Part Number: DSPIC30F2011-30I/SO
• Description: IC DSPIC MCU/DSP 12K 18SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F2011-30I/SO

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 12
• Program Memory Size: 12KB (4K x 24)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-SOIC (7.5mm Width)
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 12
• Flash Memory Size: 12KB
• Supply Voltage Range: 2.5V To 5.5V
• Package: 18SOIC W
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 12
• Interface Type: I2C/SPI/UART
• On-chip Adc: 8-chx12-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT18SO-1 - SOCKET TRANSITION 18SOIC 300MILAC30F005 - MODULE SCKT DSPIC30F 18DIP/SOICDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: DSPIC30F201130ISO

dsPIC30F2011/2012
EXAMPLE 4:
EXAMPLE 5:
DS80450D-page 6
// Note: Macros defined in device include files
#define SET_AND_SAVE_CPU_IPL (save_to, ipl){ \
save_to = SRbits.IPL; \
SET_CPU_IPL (ipl); } (void) 0;
#define RESTORE_CPU_IPL (saved_to) SET_CPU_IPL (saved_to)
#include "p30fxxxx.h"
. . .
int save_to;
SET_AND_SAVE_CPU_IPL (save_to, 3)
. . .
RESTORE_CPU_IPL (save_to)
#define INTERRUPT_PROTECT (x) { \
int save_sr; \
SET_AND_SAVE_CPU_IPL (save_sr, 7);\
x; \
RESTORE_CPU_IPL (save_sr); } (void) 0;
. . .
INTERRUPT_PROTECT (IEC0bits.U1TXIE=0);
Note:
For modification of the Interrupt 1 setting, the
INTERRUPT_PROTECT macro can be used.
This macro disables interrupts before executing
the desired expression, as shown in Example 5.
This macro is not distributed with the compiler.
Affected Silicon Revisions
A1
X
If you are using a MPLAB C30 compiler
version earlier than version 1.32, you may
still use the macros by adding them to your
application.
USING SET_AND_SAVE_CPU_IPL AND RESTORE_CPU_IPL MACROS
USING INTERRUPT_PROTECT
MACRO
© 2010 Microchip Technology Inc.