PIC18F46J11-I/PT Microchip Technology, PIC18F46J11-I/PT Datasheet - Page 4

• Manufacturer Part Number: PIC18F46J11-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J11-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 34
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164136, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F2XJXX/4XJXX FAMILY
2.1.1
PIC18FXXJXX devices have an internal core voltage
regulator. On these devices (“PIC18F” in the part num-
ber), the regulator is always enabled. The regulator
input is taken from the microcontroller V
output of the regulator is supplied to the V
pin. On these devices, this pin simultaneously serves
as both the regulator output and the microcontroller
core power input pin. For these devices, the
V
nothing else.
PIC18LFXXJXX devices do not have an internal core
voltage regulator. On these devices (“PIC18LF” in the
part number), power must be externally supplied to
both V
Whether or not the regulator is used, it is always good
design practice to have sufficient capacitance on all
supply pins. Examples are shown in Figure 2-3.
The specifications for core voltage and capacitance are
listed in Section 6.0 “AC/DC Characteristics Timing
Requirements for Program/Verify Test Mode”.
FIGURE 2-3:
DS39687D-page 4
DDCORE
PIC18LF2XJXX/4XJXX Devices (Regulator Disabled)
PIC18F2XJXX/4XJXX Devices (Regulator Enabled)
(V
(V
DD
DD
DD
/V
and V
= V
> V
CAP
PIC18F2XJXX/4XJXX/
LF2XJXX/LF4XJXX DEVICES AND
THE ON-CHIP VOLTAGE
REGULATOR
C
DDCORE
DDCORE
F
3.3V
DDCORE
pin should be tied to a capacitor and
2.5V
2.5V
)
)
3.3V
V
V
V
CONNECTIONS FOR THE
ON-CHIP REGULATOR
PIC18F2XJXX/4XJXX
/V
DD
DDCORE
SS
CAP
PIC18LF2XJXX/4XJXX
PIC18LF2XJXX/4XJXX
V
V
V
V
V
V
DD
DDCORE
SS
DD
DDCORE
SS
.
/V
CAP
/V
/V
CAP
CAP
DDCORE
DD
pins. The
/V
CAP
2.2
The PIC18F2XJXX/4XJXX family of devices offers
program memory sizes of 16, 32 and 64 Kbytes. The
memory sizes for different members of the family are
shown in Table 2-2. The overall memory maps for all
the devices are shown in Figure 2-4.
TABLE 2-2:
For purposes of code protection, the program memory
for every device is treated as a single block. Enabling
code protection, thus protects the entire code memory,
and not individual segments.
The Configuration Words for these devices are located
at addresses, 300000h through 300007h. These are
implemented as three pairs of volatile memory regis-
ters. Each register is automatically loaded from a copy
stored at the end of program memory. For this reason,
the top four words (or eight bytes) of the code space
(also called the Flash Configuration Words) should be
written with configuration data and not executable
code. The addresses of the Flash Configuration Words
are also listed in Table 2-2. Refer to section Section 5.0
“Configuration Word” for more information.
Locations, 3FFFFEh and 3FFFFFh, are reserved for
the device ID bits. These bits may be used by the
programmer to identify what device type is being pro-
grammed and are described in Section 5.1 “Device ID
Word”. These device ID bits read out normally, even
after code protection.
*
PIC18F24J10
PIC18F44J10
PIC18F24J11
PIC18F44J11
PIC18F24J50
PIC18F44J50
PIC18F25J10
PIC18F45J10
PIC18F25J11
PIC18F45J11
PIC18F25J50
PIC18F45J50
PIC18F26J11
PIC18F46J11
PIC18F26J50
PIC18F46J50
Includes PIC18F and PIC18LF devices.
Device*
Memory Maps
PROGRAM MEMORY SIZES
FOR PIC18F2XJXX/4XJXX
FAMILY DEVICES
Program
(Kbytes)
Memory
© 2008 Microchip Technology Inc.
16
32
64
Location of Flash
Configuration
FFF8h:FFFFh
3FF8h:3FFFh
7FF8h:7FFFh
Words