PIC18LF26J50-I/ML Microchip Technology, PIC18LF26J50-I/ML Datasheet - Page 251

• Manufacturer Part Number: PIC18LF26J50-I/ML
• Description: IC PIC MCU FLASH 64K 2V 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF26J50-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 16
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 31 KHz
• Number Of Programmable I/os: 16
• Number Of Timers: 5
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DV164136, MA180024, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 10
• Height: 0.88 mm
• Length: 6 mm
• Supply Voltage (max): 2.75 V, 3.6 V
• Supply Voltage (min): 2 V
• Width: 6 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.5.2
In Full-Bridge mode, all four pins are used as outputs.
An example of a full-bridge application is provided in
Figure 17-10.
In the Forward mode, the PxA pin is driven to its active
state, the PxD pin is modulated, while the PxB and PxC
pins will be driven to their inactive state as provided in
Figure 17-11.
FIGURE 17-10:
© 2009 Microchip Technology Inc.
FULL-BRIDGE MODE
PxA
PxB
PxC
PxD
EXAMPLE OF FULL-BRIDGE APPLICATION
FET
Driver
FET
Driver
QA
QB
PIC18F46J50 FAMILY
In the Reverse mode, the PxC pin is driven to its active
state, the PxB pin is modulated, while the PxA and PxD
pins will be driven to their inactive state as provided
Figure 17-11.
The PxA, PxB, PxC and PxD outputs are multiplexed
with the PORT data latches. The associated TRIS bits
must be cleared to configure the PxA, PxB, PxC and
PxD pins as outputs.
Load
V+
V-
QC
QD
FET
Driver
FET
Driver
DS39931C-page 251