PIC16LF767-I/SP Microchip Technology, PIC16LF767-I/SP Datasheet - Page 153

• Manufacturer Part Number: PIC16LF767-I/SP
• Description: IC PIC MCU FLASH 8KX14 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16LF767-I/SP

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Core Processor: PIC
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Type: FLASH
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Controller Family/series: PIC16LF
• No. Of I/o's: 25
• Ram Memory Size: 368Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Processor Series: PIC16LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: AUSART, CCP, I2C, MSSP, SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

12.0
The Analog-to-Digital (A/D) Converter module has
11 inputs for the PIC16F737 and PIC16F767 devices
and 14 for the PIC16F747 AND PIC16F777 devices.
The A/D converter allows conversion of an analog input
signal to a corresponding 10-bit digital number.
A new feature for the A/D converter is the addition of
programmable acquisition time. This feature allows the
user to select a new channel for conversion and to set
the GO/DONE bit immediately. When the GO/DONE bit
is set, the selected channel is sampled for the
programmed acquisition time before a conversion is
actually started. This removes the firmware overhead
required to allow for an acquisition (sampling) period
(see Register 12-3 and Section 12.2 “Selecting and
Configuring Automatic Acquisition Time”).
 2004 Microchip Technology Inc.
ANALOG-TO-DIGITAL
CONVERTER (A/D) MODULE
The module has five registers:
• A/D Result High Register (ADRESH)
• A/D Result Low Register (ADRESL)
• A/D Control Register 0 (ADCON0)
• A/D Control Register 1 (ADCON1)
• A/D Control Register 2 (ADCON2)
The ADCON0 register, shown in Register 12-1, controls
the operation of the A/D module and clock source. The
ADCON1 register, shown in Register 12-2, configures
the functions of the port pins, justification and voltage
reference
Register 12-3, configures the programmed acquisition
time.
Additional information on using the A/D module can be
found in the “PICmicro
Reference Manual” (DS33023) and in Application Note
AN546 “Using the Analog-to-Digital (A/D) Converter”
(DS00546).
sources.
The
®
PIC16F7X7
Mid-Range MCU Family
ADCON2,
DS30498C-page 151
shown
in