ST7FLITE39F2M3 STMicroelectronics, ST7FLITE39F2M3 Datasheet - Page 200

• Manufacturer Part Number: ST7FLITE39F2M3
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE39F2M3

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-8406 - BOARD STF20NM50FD/STF7LITE39BF2497-8403 - BOARD DEMO STCC08 AC SW DETECTOR497-6398 - BOARD EVAL ST7FLITE39/STM1403497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5514 - EVAL BOARD THERMO CONTROL REFRIG497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Function Descriptions
Notes:
– This function is for ST72F521,ST72F561,ST72F65,ST72F62,ST72F264, ST72325 and
– This function is for Nested Interrupts only.
Caution: If you select an interrupt which is not present in the Peripheral then he will get an
200/235
Input Parameter 1
Output Parameter
Required Preconditions
Functions called
Postconditions
See also
ST7232A devices.
error message during compilation.
IT_I2C
Returns the software priority of I2C peripheral interrupt
IT_PWMART
Returns the software priority of PWMART peripheral inter-
rupt
IT_DTC
Returns the software priority of DTC interrupt
IT_PLG
Returns the software priority of Power Management USB
plug/unplug interrupt
IT_ESUSP
Returns the software priority of USB Endsuspend interrupt
IT_USB
Returns the software priority of USB peripheral interrupt
IT_TIM
Returns the software priority of TIMER interrupt
IT_ADC
Returns the software priority of A/D End of Conversion in-
terrupt
IT_CSS
Returns the software priority of Clock Filter interrupt
IT_SCI1,IT_SCI2
Returns the software priority of SCI interrupts
IT_LEVEL_0
Priority of the selected interrupt is at Level0
IT_LEVEL_1
Priority of the selected interrupt is at Level1
IT_LEVEL_2
Priority of the selected interrupt is at Level2
IT_LEVEL_3
Priority of the selected interrupt is at Level3
None
None
None
None