ST72F264G2B6 STMicroelectronics, ST72F264G2B6 Datasheet - Page 140

• Manufacturer Part Number: ST72F264G2B6
• Description: MCU 8-BIT 8K FLASH 32-SDIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F264G2B6

• Mfg Application Notes: ST7 Checksum Capability, AN1070 App Note
• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Processor Series: ST72F2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7F264-IND/USB, ST72F34X-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• For Use With: 497-6423 - BOARD EVAL BASED ON ST72264G1497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5570

Function Descriptions
Table 90. TIMER8_ICAP_Mode
140/235
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameter
Required Preconditions
Functions called
Postconditions
See also
TIMER8_ICAP_Mode
Void TIMER8_ICAP_Mode(Timer8_Icap ICAP_I,
Timer8_Edge EDGE_SELECT_Y)
Configures the timer8 to Input capture mode. It determines
the type of level transition occurred on input capture pins.
This function should be called twice in order to use both
ICAP1 & ICAP2.
TIMER8_ICAP_I
where I can be 1 or 2.
I = 1, Input capture 1 is selected.
I = 2, Input capture 2 is selected.
TIMER8_EDGE_Y
where Y can be 0 or 1.
Y= 0, Capture occurs at falling edge.
Y= 1, Capture occurs at the rising edge.
None
1. Input Capture pin used must be configured as floating
input or pull up without interrupt.
2.Only input capture2 can be used if PWM or OPM is ac-
tive.
None
1. Timer8 configured for input capture mode.
2. To detect the occurrence of valid edge, you can poll the
input capture flag using the function
TIMER8_Status_Flag. This is in case you have not ena-
bled the input capture interrupt.
TIMER8_Status_Flag,TIMER8_PWM_Mode,
TIMER8_OPM_Mode, TIMER8_ICAP_Getvalue