DS5001FP-16 Maxim Integrated Products, DS5001FP-16 Datasheet - Page 24

• Manufacturer Part Number: DS5001FP-16
• Description: IC MPU 128K 16MHZ 80-TQFP
• Manufacturer: Maxim Integrated Products
• Series: DS500xr

Specifications of DS5001FP-16

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: EBI/EMI, SIO, UART/USART
• Peripherals: Power-Fail Reset, WDT
• Number Of I /o: 32
• Program Memory Type: SRAM
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 80-MQFP, 80-PQFP
• Processor Series: DS5001FP
• Core: 8051
• Data Bus Width: 8 bit
• Program Memory Size: 128 KB
• Data Ram Size: 128 KB
• Interface Type: UART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 2
• Operating Supply Voltage: 4.5 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

NOTES:
All parameters apply to both commercial and industrial temperature operation unless otherwise noted.
1) All voltages are referenced to ground.
2) Maximum operating I
3) Idle mode, I
4) Stop mode, I
5) Pin capacitance is measured with a test frequency: 1MHz, T
6) I
7) I
8) V
9) Crystal startup time is the time required to get the mass of the crystal into vibrational motion from the
10) This parameter applies to industrial temperature operation.
11)
t
t
connected; RST = MSEL = XTAL1 = V
time that power is first applied to the circuit until the first clock pulse is produced by the on-chip
oscillator. The user should check with the crystal vendor for a worst-case specification on this time.
PF
CLKF
CLKF
CCO1
LI
CCO2
is the current drawn from V
pin operation is specified with V
= 10ns, V
= 10ns, V
is the maximum average operating current that can be drawn from V
is measured with V
IDLE
STOP
IL
IL
= 0.5V; XTAL2 disconnected; RST = PORT0 = V
= 0.5V; XTAL2 disconnected; PORT0 = V
, is measured with all output pins disconnected; XTAL1 driven with t
, is measured with all output pins disconnected; PORT0 = V
CC
is measured with all output pins disconnected; XTAL1 driven with t
CC
< V
LI
LI
input when V
, and a maximum load of 10µA on V
BAT
SS
³ 3.0V.
.
24 of 27
CC
= 0V and V
A
CC
CCO
= +25°C.
, RST = MSEL = V
is disconnected.
CC
, MSEL = V
CCO
CCO
.
in normal operation.
SS
SS
.
.
CC
; XTAL2 not
DS5001FP
CLKR
CLKR
,
,