PIC16LC61-04I/P Microchip Technology, PIC16LC61-04I/P Datasheet - Page 307

• Manufacturer Part Number: PIC16LC61-04I/P
• Description: MICR CTL LP 1K 4MHZ OTP ET 18DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16LC61-04I/P

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 13
• Program Memory Size: 1.75KB (1K x 14)
• Program Memory Type: OTP
• Ram Size: 36 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-DIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Eeprom Size: -
• Data Converters: -
• Connectivity: -

APPENDIX A: MODIFICATIONS
The following are the list of modifications over the
PIC16C5X microcontroller family:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Wake-up from SLEEP through interrupt is
11. Two separate timers, Oscillator Start-up Timer
12. PORTB has weak pull-ups and interrupt on
13. Timer0 pin is also a port pin (RA4/T0CKI) now.
14. FSR is made a full 8-bit register.
15. “In-circuit programming” is made possible. The
16. Power Control register (PCON) is added with a
17. Brown-out Reset has been added to the follow-
1997 Microchip Technology Inc.
Instruction word length is increased to 14-bits.
This allows larger page sizes both in program
memory (2K now as opposed to 512 before) and
register file (128 bytes now versus 32 bytes
before).
A PC high latch register (PCLATH) is added to
handle program memory paging. PA2, PA1, PA0
bits are removed from STATUS register.
Data memory paging is redefined slightly. STA-
TUS register is modified.
Four new instructions have been added:
RETURN, RETFIE, ADDLW, and SUBLW.
Two instructions TRIS and OPTION are being
phased out although they are kept for compati-
bility with PIC16C5X.
OPTION and TRIS registers are made address-
able.
Interrupt capability is added. Interrupt vector is
at 0004h.
Stack size is increased to 8 deep.
Reset vector is changed to 0000h.
Reset of all registers is revisited. Five different
reset (and wake-up) types are recognized. Reg-
isters are reset differently.
added.
(OST) and Power-up Timer (PWRT), are
included for more reliable power-up. These tim-
ers are invoked selectively to avoid unnecessary
delays on power-up and wake-up.
change feature.
user can program PIC16CXX devices using only
five pins: V
(data in/out).
Power-on Reset status bit (POR).(Not on the
PIC16C61).
ing devices:
PIC16C62A/R62/63/R63/64A/R64/65A/R65/66/
67.
DD
, V
SS
, V
PP
, RB6 (clock) and RB7
APPENDIX B: COMPATIBILITY
To convert code written for PIC16C5X to PIC16CXX,
the user should take the following steps:
1.
2.
3.
4.
5.
Remove any program memory page select
operations (PA2, PA1, PA0 bits) for CALL,
GOTO.
Revisit any computed jump operations (write to
PC or add to PC, etc.) to make sure page bits
are set properly under the new scheme.
Eliminate any data memory page switching.
Redefine data variables to reallocate them.
Verify all writes to STATUS, OPTION, and FSR
registers since these have changed.
Change reset vector to 0000h.
PIC16C6X
DS30234D-page 307