DSPIC30F4013T-20I/ML Microchip Technology, DSPIC30F4013T-20I/ML Datasheet - Page 7

• Manufacturer Part Number: DSPIC30F4013T-20I/ML
• Description: IC DSPIC MCU/DSP 48K 44QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F4013T-20I/ML

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, POR, PWM, WDT
• Number Of I /o: 30
• Program Memory Size: 48KB (16K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: DSPIC30F4013T20IM

11. Page 5-7, Register 5-1 NVMCON
Register 5-1:
 2004 Microchip Technology Inc.
Upper Byte:
bit 15
bit 14
bit 7-0
R/S-0
WR
On page 5-7, Register 5-1: NVMCON: Non-
Volatile Memory Control Register, the definition of
the WREN and PROGOP bits should be modified
as follows. All other bit definitions do not change
and hence are not described here.
WREN: Write (Erase or Program) Enable bit
1 = Enable an erase or program operation
0 = No operation allowed (Device clears this bit on completion of the write/erase operation)
PROGOP<7:0>: Programming Operation Command Byte bits
Erase Operations:
0x41 = Erase 1 row (32 instruction words) from 1 panel of program Flash
0x44 = Erase 1 data word from data Flash
0x45 = Erase 1 row (16 data words) from data Flash
Programming Operations:
0x01 = Program 1 row (32 instruction words) into Flash program memory
0x04 = Program 1 data word into data EEPROM
0x05 = Program 1 row (16 data words) into data EEPROM
0x08 = Program 1 data word into device configuration register
Legend:
R = Readable bit
S = Settable bit
‘0’ = Bit is cleared
WREN
R/W-0
NVMCON: Non-Volatile Memory Control Register
Lower Byte:
bit 7
R/W-0
WRERR
R/W-0
R/W-0
dsPIC30F Family Reference Manual
W = Writable bit
-n = Value at POR
x = Bit is unknown
U-0
—
R/W-0
U-0
—
PROGOP<7:0>
R/W-0
U-0
—
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
R/W-0
U-0
—
R/W-0
U-0
—
bit 8
R/W-0
DS80169E-page 7
R/W-0
bit 0