PA12A Cirrus Logic Inc, PA12A Datasheet - Page 3

• Manufacturer Part Number: PA12A
• Description: IC PWR AMP 90V 10A A GRADE 8P TO
• Manufacturer: Cirrus Logic Inc
• Series: Apex Precision Power™r

Specifications of PA12A

• Amplifier Type: Power
• Number Of Circuits: 1
• Slew Rate: 4 V/µs
• Gain Bandwidth Product: 4MHz
• Current - Input Bias: 10nA
• Voltage - Input Offset: 1000µV
• Current - Supply: 25mA
• Current - Output / Channel: 15A
• Voltage - Supply, Single/dual (±): 20 V ~ 100 V, ±10 V ~ 50 V
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: TO-3-8
• Number Of Channels: 1
• Voltage Gain Db: 110 dB
• Common Mode Rejection Ratio (min): 74 dB
• Input Offset Voltage: 4 mV
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• Maximum Dual Supply Voltage: +/- 45 V
• Minimum Operating Temperature: - 55 C
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1304

SOCKET
MS03
THERMAL WASHER
TW03
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE [phone] • FAX [phone] • ORDERS [phone] • EMAIL [e-mail]
This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications are subject to change without notice.
AN PA12 REV A JANUARY 2005 © 2005 Apex Microtechnology Corp.
NOTES:
1. Base material is aluminum, 0.002” thick. Do not allow the
2. For optimum thermal transfer, avoid abrasive handling of
3. The dry thermal compound will flow filling header to heatsink
4. Do not store unused thermal washers above 40°C.
5. A new washer must be used for each mounting.
6. Part number TW03 consists of a package of 10 washers.
7. Thermal resistance is 0.1°C/W.
washer to touch pins of the amplifier.
washers which can damage their 0.5mil thick layer of thermal
compound with which each side is coated.
voids as soon as the material reached 60°C.
3