LM2904N STMicroelectronics, LM2904N Datasheet - Page 4

• Manufacturer Part Number: LM2904N
• Description: IC OP AMP LOW PWR DUAL 8-DIP
• Manufacturer: STMicroelectronics

Specifications of LM2904N

• Amplifier Type: General Purpose
• Number Of Circuits: 2
• Slew Rate: 0.6 V/µs
• Gain Bandwidth Product: 1.1MHz
• Current - Input Bias: 20nA
• Voltage - Input Offset: 2000µV
• Current - Supply: 700µA
• Current - Output / Channel: 40mA
• Voltage - Supply, Single/dual (±): 3 V ~ 30 V, ±1.5 V ~ 15 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Number Of Channels: 2
• Common Mode Rejection Ratio (min): 70 dB
• Input Offset Voltage: 7 mV
• Input Bias Current (max): 150 nA
• Operating Supply Voltage: 5 V, 9 V, 12 V, 15 V
• Supply Current: 1.2 mA
• Maximum Power Dissipation: 500 mW
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Dual Supply Voltage: +/- 3 V, +/- 5 V, +/- 9 V, +/- 12 V
• Maximum Dual Supply Voltage: +/- 15 V
• Minimum Dual Supply Voltage: +/- 1.5 V
• Mounting Style: Through Hole
• Shutdown: No
• Supply Voltage (max): 30 V
• Supply Voltage (min): 3 V
• Technology: Bipolar
• Voltage Gain Db: 100 dB
• Bandwidth: 1.1 MHz
• Channel Separation: 120
• Common Mode Rejection Ratio: 85
• Current, Input Bias: 20 nA
• Current, Input Offset: 2 nA
• Current, Output: 40 mA
• Current, Supply: 0.7 mA
• Harmonic Distortion: 0.02 %
• Number Of Amplifiers: Dual
• Package Type: DIP-8
• Signal Gain: 100 V/mV
• Temperature, Operating, Range: -40 to +125 °C
• Voltage, Input: -0.3 to +32 V
• Voltage, Noise: 55 nV/sqrt Hz
• Voltage, Offset: 2 mV
• Voltage, Output, High: 28 V
• Voltage, Output, Low: 5 mV
• Voltage, Supply: 3 to 30 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-1562-5

Absolute maximum ratings and operating conditions
Table 2.
4/21
Symbol
T
V
V
oper
icm
CC
8. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
9. Charged device model: all pins and the package are charged together to the specified voltage and then
Operating conditions
Supply voltage
Common mode input voltage range
Operating free-air temperature range
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
discharged directly to the ground through only one pin. This is done for all pins.
Parameter
Doc ID 2471 Rev 13
0 to V
-40 to +125
3 to 30
Value
CC+
- 1.5
LM2904, LM2904A
Unit
°C
V
V