TL072IN STMicroelectronics, TL072IN Datasheet - Page 8

• Manufacturer Part Number: TL072IN
• Description: IC OP AMP JFET DUAL LNOISE 8-DIP
• Manufacturer: STMicroelectronics

Specifications of TL072IN

• Amplifier Type: J-FET
• Number Of Circuits: 2
• Slew Rate: 16 V/µs
• Gain Bandwidth Product: 4MHz
• Current - Input Bias: 20pA
• Voltage - Input Offset: 3000µV
• Current - Supply: 1.4mA
• Current - Output / Channel: 40mA
• Voltage - Supply, Single/dual (±): 6 V ~ 36 V, ±3 V ~ 18 V
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Number Of Channels: 2
• Common Mode Rejection Ratio (min): 80 dB
• Input Offset Voltage: 10 mV
• Input Bias Current (max): 200 pA
• Supply Current: 2.5 mA
• Maximum Power Dissipation: 680 mW
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Dual Supply Voltage: +/- 5 V, +/- 9 V, +/- 12 V, +/- 15 V
• Maximum Dual Supply Voltage: +/- 18 V
• Minimum Dual Supply Voltage: +/- 3 V
• Mounting Style: Through Hole
• Shutdown: No
• Technology: BiFET
• Voltage Gain Db: 106.02 dB
• Bandwidth: 4 MHz
• Channel Separation: 120
• Common Mode Rejection Ratio: 86
• Current, Input Bias: 20 pA
• Current, Input Offset: 5 pA
• Current, Output: 20 mA
• Current, Supply: 1.4 mA
• Harmonic Distortion: 0.01 %
• Number Of Amplifiers: Dual
• Package Type: DIP-8
• Resistance, Input: 10^12 Ohms
• Signal Gain: 200 V/mV
• Temperature, Operating, Range: -40 to +105 °C
• Time, Rise: 0.1 μs
• Voltage, Input: ±15 V
• Voltage, Noise: 15 nV/sqrt Hz
• Voltage, Offset: 3 mV
• Voltage, Supply: 6 to 36 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-7659-5; TL072IN

00022-1,00053-1
[8] Others
8-1. Test cond.
8-2. Std warrantry
8-3. Others
[7] Packing and Marking
(210mm)
TDK CORPORATION
A shipping box is packaged to avoid from damage. Following items are printed on the box.
A normal test condition :Temperature (20±15°C), Humidity (65±20%RH).
One year after shipment.This covers any defects in material or workmanship. Defective uni ts will be replaces
at no charge.
TDK and customer are to discuss changes,problems, and modifications and etc, when needed.
Packing style as under Fig. (300 going in with a standard.)
7-1.
7-2.
7-3.
7-4.
7-5.
7-6.
(480mm)
TDK part No.
Manufacture
Customer part No.
QTY.
Inspection No.
Country of origin
No.
PRODUCT DRAWING
NAME OF DRAWING
MATERIALS NAME
(ex.) CXA-L0512-NJL
TDK
Product
DC-AC INVERTER UNIT CXA-L05xx-NJL
(340mm
)
PRODUCT NAME or MODEL,TITLE
QU
Styrofoam
Corrugated cardboard
Styrofoam 60pcs in one tray x 5trays
=300pcs/one box
acking box.
TDK part No.
Manufacture
Customer part No.
QTY.
Inspection No.
Countory of origin
MATERIAL
DRAWING No.
CTR-0732-E
TSB-08-01-05(00) form-6(A4)
REMARK
PAGE
7