TSC103IDT STMicroelectronics, TSC103IDT Datasheet - Page 15

• Manufacturer Part Number: TSC103IDT
• Description: IC AMP HI SIDE CURR SENSE 8SOIC
• Manufacturer: STMicroelectronics

Specifications of TSC103IDT

• Amplifier Type: Current Sense
• Number Of Circuits: 1
• Output Type: Buffered
• Slew Rate: 0.6 V/µs
• -3db Bandwidth: 700kHz
• Current - Input Bias: 10µA
• Voltage - Input Offset: 500µV
• Current - Supply: 200µA
• Current - Output / Channel: 26mA
• Voltage - Supply, Single/dual (±): 2.7 V ~ 5.5 V, ±1.35 V ~ 2.75 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Number Of Channels: 2
• Common Mode Rejection Ratio (min): 95 dB
• Input Voltage Range (max): 7 V
• Input Voltage Range (min): 2.9 V
• Input Offset Voltage: +/-1100 uV
• Input Bias Current (max): 15 mA
• Output Current (typ): 26 mA
• Operating Supply Voltage: 2.7 V to 5.5 V
• Supply Current: 480 uA
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Dual Supply Voltage: - 7.1 V to + 65 V
• Maximum Dual Supply Voltage: + 65 V
• Minimum Dual Supply Voltage: - 7.1 V
• Mounting Style: SMD/SMT
• Operating Temperature Range: - 40 C to + 125 C
• Output Voltage: 135 mV
• Settling Time: 10 us
• Shutdown: No
• Supply Voltage (max): 7 V
• Supply Voltage (min): - 0.7 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Gain Bandwidth Product: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-10556-2

TSC103
5
Maximum permissible voltages on pins
The TSC103 can be used in either single- or dual-supply configuration. The dual-supply
configuration is achieved by disconnecting Vcc- and Gnd, and connecting Vcc- to a negative
supply.
referred to the Vcc- potential, while the maximum voltages on the positive supply pin, gain
selection pins and output pins are referred to the Gnd pin. It should also be noted that the
maximum voltage between Vcc- and Vcc+ is limited to 15 V.
Figure 8.
Figure 8
Vp and Vm
Vp and Vm
+75 V
Maximum voltages on pins
-16 V
Vcc-
illustrates how the absolute maximum voltages on input pins Vp and Vm are
Doc ID 16873 Rev 1
+15 V
Vcc+
Vcc-
Maximum permissible voltages on pins
-0.3V
+7 V
Vcc+
Vcc+
Gnd
SEL1, SEL2 and Out
SEL1, SEL2 and Out
+ 0.3 V
-0.3 V
Vcc+
Gnd
AM04522
15/23