CAT809TSDI-GT3 ON Semiconductor, CAT809TSDI-GT3 Datasheet - Page 8

• Manufacturer Part Number: CAT809TSDI-GT3
• Description: IC SUPERVISOR PP ACT LOW SC-70
• Manufacturer: ON Semiconductor
• Type: Simple Reset/Power-On Resetr

Specifications of CAT809TSDI-GT3

• Number Of Voltages Monitored: 1
• Output: Push-Pull, Totem Pole
• Reset: Active Low
• Reset Timeout: 140 ms Minimum
• Voltage - Threshold: 3.08V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SC-70-3, SOT-323-3
• Monitored Voltage: 2.5 V, 3 V, 3.3 V, 5 V
• Output Type: Active Low, Push-Pull
• Manual Reset: Not Resettable
• Watchdog: No Watchdog
• Battery Backup Switching: No Backup
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.2 V
• Supply Current (typ): 15 uA
• Maximum Power Dissipation: 175 mW
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Power Fail Detection: No
• Undervoltage Threshold: 3.04 V
• Overvoltage Threshold: 3.11 V
• Power-up Reset Delay (typ): 240 ms (Typ)
• Number Of Elements: 1
• Monitored Voltage 1 (typ): 2.5/3/3.3/5V
• Watchdog Timer: No
• Chip Enable Signals: No
• Reset Active Time: 240ms(Typ)ms
• Package Type: SC-70
• Operating Supply Voltage (min): 1.2V
• Operating Supply Voltage (max): 5.5V
• Reset Threshold Voltage (max): 3.11V
• Reset Threshold Voltage (min): 3.04V
• Power Dissipation: 175mW
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 3
• Supply Current: 0.015mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

CAT809, CAT810
VALID RESET WITH V
To ensure that the CAT809 RESET pin is in a known
state when V
resistor between RESET pin and GND is recommended;
the value is not critical. For the CAT810, a pull-up
resistor from RESET pin to V
BI-DIRECTIONAL RESET PIN INTERFACING
The CAT809/810 can interface with µP/µC bi-directional
reset pins by connecting a 4.7 kΩ resistor in series with
the CAT809/810 reset output and the µP/µC bi-directional
reset pin.
Doc. No. 3004, Rev. Q
Power
Supply
Figure 3. RESET
Power
Supply
CC
RESET
RESET
RESET Valid with V
RESET
is under 1.0 V, a 100 kΩ pull-down
CAT809
GND
CC
V CC
UNDER 1.0 V
RESET
CC
CAT809
is needed.
GND
V CC
Figure 5. Bi-directional Reset Pin Interfacing
CC
RESET
Under 1.0 V
Bi-directional I/O Pin
4.7kΩ
100kΩ
8
Power
Supply
RESET
INPUT
Figure 4. RESET Valid with V
BUF
GND
V CC
µP
Buffered
RESET
CAT810
(For example: 68HC11)
GND
V CC
RESET
Characteristics subject to change without notice
© 2005 by Catalyst Semiconductor, Inc.
CC
Under 1.1 V
100kΩ