CAT809TSDI-GT3 ON Semiconductor, CAT809TSDI-GT3 Datasheet - Page 11

• Manufacturer Part Number: CAT809TSDI-GT3
• Description: IC SUPERVISOR PP ACT LOW SC-70
• Manufacturer: ON Semiconductor
• Type: Simple Reset/Power-On Resetr

Specifications of CAT809TSDI-GT3

• Number Of Voltages Monitored: 1
• Output: Push-Pull, Totem Pole
• Reset: Active Low
• Reset Timeout: 140 ms Minimum
• Voltage - Threshold: 3.08V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SC-70-3, SOT-323-3
• Monitored Voltage: 2.5 V, 3 V, 3.3 V, 5 V
• Output Type: Active Low, Push-Pull
• Manual Reset: Not Resettable
• Watchdog: No Watchdog
• Battery Backup Switching: No Backup
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.2 V
• Supply Current (typ): 15 uA
• Maximum Power Dissipation: 175 mW
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Power Fail Detection: No
• Undervoltage Threshold: 3.04 V
• Overvoltage Threshold: 3.11 V
• Power-up Reset Delay (typ): 240 ms (Typ)
• Number Of Elements: 1
• Monitored Voltage 1 (typ): 2.5/3/3.3/5V
• Watchdog Timer: No
• Chip Enable Signals: No
• Reset Active Time: 240ms(Typ)ms
• Package Type: SC-70
• Operating Supply Voltage (min): 1.2V
• Operating Supply Voltage (max): 5.5V
• Reset Threshold Voltage (max): 3.11V
• Reset Threshold Voltage (min): 3.04V
• Power Dissipation: 175mW
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 3
• Supply Current: 0.015mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Example of Ordering Information
7. All packages are RoHS−compliant (Lead−free, Halogen−free)
8. The standard lead finish is NiPdAu. Contact factory for other lead finishes.
9. The device used in the above example is a CAT809STBI−GT3 (Push−Pull / Active Low Output, trip level of 2.85 V to 3.00 V, SOT−23 Green,
10. For additional package and temperature options, please contact your nearest ON Semiconductor Sales office.
11. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
AE
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
NiPdAu, Tape & Reel, 3,000/Reel).
Specifications Brochure, BRD8011/D.
2
Company ID
is a trademark of Semiconductor Components Industries, LLC.
803: Open−Drain / Active Low Output
809: Push−Pull / Active Low Output
810: Push−Pull / Active High Output
Prefix
CAT
Device Type
Device #
809
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
(Notes 8, 9, 10)
L: 4.63 V
H: 4.55 V
M: 4.38 V
J: 4.00 V
T: 3.08 V
S: 2.93 V
R: 2.63 V
Z: 2.32 V
V: 1.60 V
Trip Level
Suffix
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
USA/Canada
Phone: [phone]
Phone: 81−3−5773−3850
S
http://onsemi.com
Package Type (Note 7)
11
TBI: SOT−23 Green
SDI: SC70 Green
TBI
Lead Finish
G: NiPdAu
− G
Tape & Reel (Note 11)
T: Tape & Reel
3: 3,000/Reel
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
T3
CAT803/D