16R500GU Littelfuse Inc, 16R500GU Datasheet - Page 3

• Manufacturer Part Number: 16R500GU
• Description: PTC RESETTABLE 16V 5A RADIAL
• Manufacturer: Littelfuse Inc
• Series: POLYFUSE® 16Rr

Specifications of 16R500GU

• R Min/max: 0.015 ~ 0.034 Ohm
• Voltage - Max: 16V
• Time To Trip: 2s
• Current - Hold (ih) (max): 5A
• Current - Trip (it): 8.5A
• Current - Max: 100A
• Package / Case: Radial
• Hold Current: 5 Amps
• Trip Current: 8.5 Amps
• Current Rating (max): 100 Amps
• Resistance: 0.034 Ohms
• Maximum Voltage: 16 VoltsDC
• Termination Style: Radial
• Mounting Style: Through Hole
• Holding Current: 5A
• Tripping Current: 8.5A
• Initial Resistance Max: 0.034ohm
• Operating Voltage: 16VDC
• Ptc Fuse Case: Radial Leaded
• External Depth: 3mm
• Fuse Terminals: Radial Leaded
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 16R500G; F3183

© 2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/16R.html for current information.
Soldering Parameters - Wave Soldering
Pre-Heating Zone
Soldering Zone
Cooling Zone
Physical Specifications
Lead Material
Soldering
Characteristics
Insulating Material
Device Labeling
2.5A: Tin-plated Copper clad Steel
3.0 - 14.0A: Tin-plated Copper
Solderability per MIL–STD–202,
Method 208E
Cured, flame retardant epoxy polymer
meets UL94V-0 requirements.
Marked with ‘LF’, voltage, current rating,
and date code.
Refer to the condition
recommended by the
flux manufacturer.
Max. ramping rate
should not exceed 4°C/
Sec.
Max. solder
temperature should not
exceed 260°C
Cooling by natural
convection in air.
Radial Leaded > 16R Series
POLYFUSE
Revised: July 12, 2010
®
71
Resettable PTCs
Operating/Storage
Temperature
Maximum Device Surface
Temperature in Tripped State
Passive Aging
Humidity Aging
Thermal Shock
Solvent Resistance
Moisture Resistance Level
Environmental Specifications
260
220
190
160
0
Preheating
60 min.
Soldering
5 max.
Time(s)
-40°C to +85°C
125°C
+85°C, 1000 hours
-/+ 5% typical resistance
change
+85°C, 85% R.H., 1000 hours
-/+ 5% typical resistance
change
+85°C to -40°C 10 times
-/+ 5% typical resistance
change
MIL–STD–202, Method 215F
No change
Level 1, J–STD–020C
Cooling
16R Series