L7915CP STMicroelectronics, L7915CP Datasheet - Page 12

• Manufacturer Part Number: L7915CP
• Description: IC REG NEG 1.5A 15V TO-220FP
• Manufacturer: STMicroelectronics

Specifications of L7915CP

• Regulator Topology: Negative Fixed
• Voltage - Output: -15V
• Voltage - Input: Down to -35V
• Voltage - Dropout (typical): 1.1V @ 1A
• Number Of Regulators: 1
• Current - Output: 1.5A
• Operating Temperature: 0°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: TO-220-3 Full Pack (Straight Leads)
• Polarity: Negative
• Number Of Outputs: 1
• Output Type: Fixed
• Output Voltage: - 15 V
• Output Current: 500 mA
• Line Regulation: 300 mV
• Load Regulation: 300 mV
• Dropout Voltage (max): 1.1 V
• Input Voltage Max: - 23 V
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: 0 C
• Mounting Style: Through Hole
• Primary Input Voltage: -23V
• Output Voltage Fixed: -15V
• Dropout Voltage Vdo: 1.1V
• No. Of Pins: 3
• Voltage Regulator Case Style: TO-220
• Operating Temperature Range: 0°C To +150°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-7295-5; L7915CP

Application information
6
Figure 4.
Figure 5.
12/25
Application information
Fixed output regulator
1. To specify an output voltage, substitute voltage value for "XX".
2. Required for stability. For value given, capacitor must be solid tantalum. If aluminium electrolytic are used,
3. To improve transient response. If large capacitors are used, a high current diode from input to output
Split power supply (± 15 V - 1 A)
(*) Against potential latch-up problems.
at least ten times value should be selected. C1 is required if regulator is located an appreciable distance
from power supply filter.
(1N4001 or similar) should be introduced to protect the device from momentary input short circuit.
Doc ID 2149 Rev 19
L79xxC