NJM2886DL2-33-TE1 NJR, NJM2886DL2-33-TE1 Datasheet - Page 4

• Manufacturer Part Number: NJM2886DL2-33-TE1
• Description: IC LDO VOLT REG 3.3V TO-252-5
• Manufacturer: NJR
• Series: -r

Specifications of NJM2886DL2-33-TE1

• Regulator Topology: Positive Fixed
• Voltage - Output: 3.3V
• Voltage - Input: Up to 14V
• Voltage - Dropout (typical): 0.18V @ 300mA
• Number Of Regulators: 1
• Current - Output: 650mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: DPak, TO-252 (5 leads + tab)
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 14 V
• Output Voltage: 3.3 V
• Output Type: Fixed
• Dropout Voltage (max): 0.28 V
• Output Current: 650 mA
• Line Regulation: 0.1 % / V
• Load Regulation: 0.03 % / mA
• Voltage Regulation Accuracy: 1 %
• Maximum Power Dissipation: 0.8 W
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Current - Limit (min): -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Details
• Other names: NJM2886DL233TE1TR

NJM2886
- 4 -
2 In use of ON/OFF CONTROL:
1 In the case where ON/OFF Control is not required:
TYPICAL APPLICATION
In the case of using a resistance "R" between V
Connect control terminal to V
State of control terminal:
The current flow into the control terminal while the IC is ON state (I
"R" is inserted between V
The minimum control voltage for ON state (V
resistance "R". The I
characteristics. Therefore, the resistance "R" should be carefully selected to ensure the control voltage exceeds the
V
CONT (ON)
“H”
“L” or “open”
output is enabled.
over the required temperature range.
V
V
IN
IN
output is disabled.
*4 1.7V<Vo 2.6V version: Co=4.7 F(ceramic)
CONT
*4 1.7V<Vo 2.6V version: Co=4.7 F
Vo 1.7V version: 10 F(ceramic)
Vo 1.7V version: 10 F
is temperature dependence as shown in the "Control Current vs. Temperature"
IN
0.33 F
and the control terminal.
(0～300k )
IN
0.33 F
terminal
R
R
CONT (ON)
IN
CONTROL
V
CONTROL
and control.
V
IN
IN
) is increased due to the voltage drop caused by I
NJM2886
NJM2886
GND
GND
V
CONT
V
OUT
OUT
) can be reduced when a pull up resistance
2.2 F
(ceramic)
2.2 F
(ceramic)
*4
*4
V
OUT
V
OUT
CONT
Ver.2006-04-07
and the