L7905C-D2TR STMicroelectronics, L7905C-D2TR Datasheet - Page 12

• Manufacturer Part Number: L7905C-D2TR
• Description: IC VOLT REG NEG 1.5A 5V D2PAK
• Manufacturer: STMicroelectronics

Specifications of L7905C-D2TR

• Regulator Topology: Negative Fixed
• Voltage - Output: -5V
• Voltage - Input: Down to -35V
• Voltage - Dropout (typical): 1.4V @ 1A
• Number Of Regulators: 1
• Current - Output: 1.5A
• Operating Temperature: 0°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: TO-263-2, D⊃2Pak (2 leads + Tab), TO-263AB
• Polarity: Negative
• Number Of Outputs: 1
• Output Type: Fixed
• Output Voltage: - 5 V
• Output Current: 1.5 A
• Line Regulation: 100 mV
• Load Regulation: 100 mV
• Input Voltage Max: - 35 V
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Voltage Regulation Accuracy: 4 %
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Application information
6
Figure 4.
Figure 5.
12/25
Application information
Fixed output regulator
1. To specify an output voltage, substitute voltage value for "XX".
2. Required for stability. For value given, capacitor must be solid tantalum. If aluminium electrolytic are used,
3. To improve transient response. If large capacitors are used, a high current diode from input to output
Split power supply (± 15 V - 1 A)
(*) Against potential latch-up problems.
at least ten times value should be selected. C1 is required if regulator is located an appreciable distance
from power supply filter.
(1N4001 or similar) should be introduced to protect the device from momentary input short circuit.
Doc ID 2149 Rev 19
L79xxC