MTCBA-EN-AK-EU/GB Multi-Tech Systems, MTCBA-EN-AK-EU/GB Datasheet - Page 7

no-image

MTCBA-EN-AK-EU/GB

Manufacturer Part Number
MTCBA-EN-AK-EU/GB
Description
KIT ACCY FOR ETH MODEMS EU/GB
Manufacturer
Multi-Tech Systems
Datasheets

Specifications of MTCBA-EN-AK-EU/GB

Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Accessory Type
-
For Use With/related Products
-
Set Your PC’s TCP/IP Address for
Ethernet Functionality
Multi-Tech Systems, Inc. Quick Start Guide
After the wireless account is established and the device is
properly connected, set up the TCP/IP address on your PC, if
not previously set.
1.
2.
3.
4.
Open the PC's Control Panel.
Select Networks or Network Connections.
Under Protocols, select TCP/IP.
Under Properties, choose one of the following:
MultiModem Wireless Modem with Ethernet Interface
Fused DC Power Connection
cable to the DC power source on
the vehicle or machine in which
you are mounting the modem. Be
sure the GND connection is
correct.
and black wire to – (negative).
Note:
according to the type of
application, you can use
permanent “+” or key-switched
“+”. Connect the power supply to
its source (for example, in a
mobile situation, to the vehicle’s
DC fuse/terminal block).
Warning:
is provided on the device. To
ensure complete protection, you
may want to add additional
filtering to the DC input.
Connect the fused DC power
Connect red wire to + (positive)
For automotive application:
Over-voltage protection
7

Related parts for MTCBA-EN-AK-EU/GB