LS7-ACS Panduit Corp, LS7-ACS Datasheet - Page 13

• Manufacturer Part Number: LS7-ACS
• Description: ADAPTER 120VAC F/LS7 PRINTER
• Manufacturer: Panduit Corp
• Series: PANACEA™r
• Type: PanAcea LS7 Label Parts and Accessoriesr

Specifications of LS7-ACS

• Rohs Status: Not applicable
• Accessory Type: 120 VAC Adapter
• Supply Voltage: 120VAC
• Product: Hand-Held Thermal Transfer Printer and Accessories
• Features: Compact, multi-purpose printer for electrical, data communications and facility identification
• For Use With: Panduits LS7 Hand-Held Thermal Transfer Printer
• For Use With/related Products: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 298-1347

A single LS7 tape cas sette is supplied with this unit. This machine has been designed to
allow the tape cassette to be changed quickly and easily.
To change the LS7 tape cassette:
1
2
3
4
5
6
7
10
Remove the back cover by pressing in on the rough area at the top end of the machine
and pulling off the cover. Pulling off the back cover lifts up the tape release lever.
If a tape cas sette is already installed, remove it by pulling it straight out.
If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed
wheel in the direction of the arrow on the cassette until there is no slack in the ribbon.
Insert the tape cassette firmly into the tape compartment, making sure that the entire
back of the cassette touches the bottom of the compartment.
Attach the back cover by inserting the tab on the bottom end of the cover into the slot
on the bottom end of the machine, then pushing down firmly on the top end of the
cover until it snaps into place.
Turn on the machine if it is off, and then feed the tape to remove any slack by holding
down
Press in the tape cutter lever to cut off any excess tape.
If you are using a new tape cassette provided with a stopper, be s ure to remove
the stopper before installing the cassette.
Make sure that the end of the tape feeds under the cassette tape guides.
When inserting the tape cassette, make sure that the inner ribbon does not catch
on the corner of the metal guide.
Code
and pressing
TAPE CASSETTE
Sym.
Feed
once.