ZU-1890M Panasonic - ATG, ZU-1890M Datasheet - Page 9

• Manufacturer Part Number: ZU-1890M
• Description: CARD READER FULL INSERT 2 TRACK
• Manufacturer: Panasonic - ATG

Specifications of ZU-1890M

• Card Reader Type: Magnetic, Push/Pull
• Interface: TTL
• Card Read/write Type And Tracks: Magnetic - Read Tracks 1,2
• Card Reading Direction: Ejection
• Card Standard: ISO 7810, ISO 7811
• Card Speed: 10 ~ 150 mm/s
• Supply Voltage: 4.5 V ~ 5.5 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: PCR111; ZU1890M

12.2 At the use
(6) Depends on installation environment (incorporation condition) or operation condition, external
(2) Card operation speed should be within the specification range.
(3) A slant insertion of a card causes poor contact of the card to the magnetic head,
(4) Store the card with caution to prevent dirt, scratch and distortion.
(5) Insert a cleaning card and clean the head periodically to prevent wearing of
(1) Be sure to use a card, which conforms ISO standard.
noise or electrostatics and so on may affect the machine, and which may cause an error or a
wrong operation.
Check the level of noise resistance and electrostatic resistance of your factory before using the
card reader.
Anti-magnetic of the applied card should be 2.4×10
Forced stop or change of speed during the card operation may cause a read error.
Appropriate speed to maintain stable operation is 30 cm/s ∼ 60 cm/s.
and which may result in a read error.
Especially no foreign matter shall be stuck on the magnetic stripe surface.
Use of such card may result in a read error.
Head cleaning using the cleaning card should be performed about once a
week if the room is not dusty.
the magnetic head.
- 7 -
４
A/m ∼ 2.4×10
５
A/m of ISO standard.