LS7-25-2 Panduit Corp, LS7-25-2 Datasheet - Page 16

• Manufacturer Part Number: LS7-25-2
• Description: TAPE LAM 1/4"X 26.2' BLK ON CLR
• Manufacturer: Panduit Corp
• Series: PANACEA™r
• Type: Labelr

Specifications of LS7-25-2

• Label Type: Thermal Transfer
• Label Size: 0.25" x 26.2' (6.4mm x 8.0m)
• Rohs Status: Not applicable
• Color: Clear
• Label Material: Polyester
• Background Color: Clear
• Legend: Blank
• Pack Quantity: 1
• Product: LS7 Laminated Adhesive Label Tape
• Features: Compact, multi-purpose printer for electrical
• Length: 314.96 in
• For Use With/related Products: Thermal Transfer Printer
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 298-1340

Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers.
This is particularly likely when you are using the unit outdoors or in a very dus ty
environment. If a section of the print head is covered with dust, a blank horizontal streak
may appear through the label text. Therefore, the machine’s head may need to be cleaned
from time to time.
To clean the print head and rollers:
1
2
3
4
5
If none of the above works, contact Technical Support at 866-871-4571.
Turn off the machine.
Remove the back cover, and then remove the tape cassette if one is installed. The print
head and rollers are located in the tape compartment.
Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down
motion.
Rollers: Us e a dry cotton swab to wipe each roller with an up-and-down motion while
rotating them with your finger.
Install a tape cassette, attach the back cover, and then try printing again.
If dus t still remains, use Panduit Cleaning Cassette (LS7-CLN).
PRINT HEAD & ROLLERS
13